Dobinsons MRR 3 way adjustable suspension - anyone install?

[NDM_84]

All I know is it definitely works great for me with the one size heavier rears

¯\_(ツ)_/¯

I don't doubt it's good, just a little confused, maybe there is something different about a Bronco; however, I do know my vehicle will def exceed the payload capacity which is 918lbs. I myself am 6'5 300lbs there goes 1/3 of payload lol. So I'm thinking I need 550 lbs front and 900lbs rear. I def don't want to lose wheel travel due to heavy weight.

Sponsored

 

[Built2Wild]

I just had some Dobinson's MRR installed on my 2 Door Sas Bronco and now it looks like a Pre-Runner. I left it at the shop since the front end is so high and thinking the springs could be wrong. We are hoping that it settles and levels, has anyone had this experience after installation?

 

[Gluestick]

Send a pic. There are definitely different springs options, and if you got 4d you’d be higher for sure. But you got preload adjustment to investigate as well. And it will settle after being on the lift for awhile and new springs — so it could be fine after a bit.

 

[Built2Wild]

Unfortunately, I did not take a picture but I do have the measurements before and after. Initially I was running the Eibach Pro Truck Coilovers Front Passenger 39.75, Front Driver 39.5, Rear Driver 40.25 and Rear Passenger 40.50. MRR installation Front Passenger 42.25, Front Driver 42.00, Rear Driver 40.25 and Rear Passenger 40.50. I will find out on Monday if it has settled over the weekend.

Sponsored