What did you do TO / WITH your Bronco today? 👨🏻‍🔧🧰🚿🛠

[Thatguylegit69]

i ran it along with the other wires to the tailgate. I looked into using the grommet that passes the 3rd brake light wiring to the outside, but the connector would not pass through that tight opening. I ran the line, connected things up, tucked it into the tailgate apexing and then ran directly up to the third brake light on the surface. I have a tailgate table and it hides behind that.

I ran mine similar, but it was through the grommet.
I opened up the brake light mount and fed it through there, then drilled a small hole and siliconed it.

Sponsored

 

[Nitwit]

I ran mine similar, but it was through the grommet.
I opened up the brake light mount and fed it through there, then drilled a small hole and siliconed it.

Nice. I had thought about the grommet way, too. I like what you did and may consider that in the future. Definitely a cleaner look/install

 

[Thatguylegit69]

Nice. I had thought about the grommet way, too. I like what you did and may consider that in the future. Definitely a cleaner look/install

Yeah, I muddled over it for a few days and ultimately wanted the most hidden looking set up possible.
My father in law wanted to help (hes got a bronco and was wanting a wolfbox) and he just wasn't too keen on my idea; but all said and done, he said I'll have to help him install it that way, as its very clean.

 

[NoloBronco]

Work in progress, got Bilstein 8112’s installed in the rear, still need to do front next week or so.

Today, had Mickey Thompson Baja Boss A/T and Method 709 HD mounted. Pics don’t show final final as I was still mounting the impact rings but overall very happy!

Any more pics? Thinking of doing the same with the 709’s. Tired of the black.

 

[Magic88]

Any more pics? Thinking of doing the same with the 709’s. Tired of the black.

Here's some more, no rings though

 

[Enginerd]

Any more pics? Thinking of doing the same with the 709’s. Tired of the black.

 

[Pops]

Here's an option that's a bit more blingy than nail polish:

I thought about something like these, but too many have been stolen off my bikes and Jeep in the past.
Thanks for the suggestion, though!

 

[Magic88]

Man, that looks great with the rings, makes mine look naked now,

 

[C6ZZGT]

i ran it along with the other wires to the tailgate. I looked into using the grommet that passes the 3rd brake light wiring to the outside, but the connector would not pass through that tight opening. I ran the line, connected things up, tucked it into the tailgate apexing and then ran directly up to the third brake light on the surface. I have a tailgate table and it hides behind that.

Ok I see it now. Just straight over the top.

 

[Enginerd]

Man, that looks great with the rings, makes mine look naked now,

Easy fix!

 

[CarbonGrayBronco]

I ran mine similar, but it was through the grommet.
I opened up the brake light mount and fed it through there, then drilled a small hole and siliconed it.

I'm interested in doing something similar - do you have pics of what it looks like installed in the brake light mount?

 

[Magic88]

Easy fix!

Yep! Forgot I had a credit on extremeterrain.com, just ordered them

 

[CitrusBronco]

i ran it along with the other wires to the tailgate. I looked into using the grommet that passes the 3rd brake light wiring to the outside, but the connector would not pass through that tight opening. I ran the line, connected things up, tucked it into the tailgate apexing and then ran directly up to the third brake light on the surface. I have a tailgate table and it hides behind that.

I just went through the top most flap itself. Clean and no fuss.

 

[CitrusBronco]

Well I installed the other set of Surapee light pods last night. I posted a full review in the lights section of the forum.

 

[Nitwit]

Well I installed the other set of Surapee light pods last night. I posted a full review in the lights section of the forum.

Nice! What rear bumper is that?

Sponsored