2025 Bronco Heritage Edition 2.7L Build!!

[Harry The Heritage]

Tell me, how much work is needed to swap the headlights? Looking to replace the stock light with either the DV8 or similar. I hate removing trim so I'm curious.

It’s not too much work just depends what you have already installed on your front end.

Since I have the Turn off road prerunner bar and and it has 2 bolts in a tight location I found it easier to just remove bumper and unplug my fogs, to drop the bumper.

But it’s not required to remove the bumper, I just did to not mess with those bolts.

Just remove the top plastic piece above the radiator to get to the bolts to remove grill.

Then unclip the first clip of the fender flares to remove painted body panel below grill. Then you are ready to remove the headlights.

It’s pretty simple, just go easy and slow to avoid breaking any clips. Also DV8 headlights have the side markers not attached to headlights so those actually get used on the screw holes on the side of grill.

These are the screw holes meant for the side markers.

Sponsored

 

[psdtime]

Thanks for the picture with the bumper off, I was wondering what it looked like behind there. I installed the grill marker lights from SPV, they have a good video that shows you how to get the grill off. It might be helpful for headlight replacement

 

[TBird2003]

It’s not too much work just depends what you have already installed on your front end.

Since I have the Turn off road prerunner bar and and it has 2 bolts in a tight location I found it easier to just remove bumper and unplug my fogs, to drop the bumper.

But it’s not required to remove the bumper, I just did to not mess with those bolts.

Just remove the top plastic piece above the radiator to get to the bolts to remove grill.

Then unclip the first clip of the fender flares to remove painted body panel below grill. Then you are ready to remove the headlights.

It’s pretty simple, just go easy and slow to avoid breaking any clips. Also DV8 headlights have the side markers not attached to headlights so those actually get used on the screw holes on the side of grill.

These are the screw holes meant for the side markers.

Fantastic information.

Sponsored