Search results

Nice review! I worked with them on the first couple of iterations. My feedback was well received and they did a great job addressing everything and making improvements for the final version! I have a new one sitting in my garage to install. Just need to fix my OEM sub rattle before I throw...

My vote is for velcro for the mat!

Which one did you bypass? I was out there last year and we went around the first one with the bend. It was a little sketch dropping back down onto the main trail and I'm sure I would have been better just going through it, but there were definitely already tracks from others doing the same. I...

Might want to hold off on the install. I just got mine and Broaddict sent me a DM this morning stating they're sending a reinforcement kit for the top plate. Looks like we're going to be doing some work to get these installed.

@BA OffRoad Do you have installation instructions yet? I didn't see any on the website. Also, will the floor panel need removed to install this? If so, will this cover the entire subfloor or will the subfloor be partially exposed?

Looks like I was able to snag one of these! Can't wait to get it, but a little worried about the drawer size with the updated dimensions. I'm sure it'll still work for my setup though!

Man.... Thanks a lot for pointing that out! Now I'm going to have to rotate mine so my license plate mount hides it! OP, nice choice! I've been loving running them on my badlands.

I haven't cut yet as my stock badland wheels with 0.75" cleared. I suspect It'll rub on the back-side of the front fenders with the new offset. I plan to 3D print a lower profile version of the plastic piece behind the liner to give the clearance whenever I get a chance to design it.

I've knocked them pretty good once or twice... no issues to report!

Just so I am clear, are you saying the 360 light does not turn on when the doors are opened?

I apologized if I missed this, but how much will this weigh?

I think you're better to find an aftermarket UCA that won't cause interference or stick with the stock UCAs (will work with Eibachs adjusted properly) than to get new wheels. That or install wheel spacers. I was running 0.75" wheel spacers with my stock sasquatch wheels until I bought the...

I agree. Should be fine with that offset!

Bump. Wheels sold, spacers still available.

Thanks! No, just the standard springs.

I didn't adjust the height as I am still running the stock upper control arms and they were preset at the upper end of the range where you can still align it. I did have to adjust the height back up a bit after installing my bumpers and winch though. It does still fit in the garage!

Selling stock sasquatch wheels and 0.75" Bora wheel spacers. SOLD - Qty 5 Sasquatch Wheels - $600 Wheels are in good condition Comes with all lugnuts, beauty rings, beauty ring bolts. 15k total miles 2 Wheels have very light/hard to see scuffs on the face of the spokes (see photos below). 1...

Just got mine installed today! Love the look and the extra poke of the 0 offset. Was running stock sasquatch wheels with 0.75" spacers before. Tires are 37" Yokohama Geolandar MT G003s.

Method 708s (Gloss Titanium, 17x8.5, 0 offset) installed today. Running Eibach Coilovers and 37" Yokohama Geolandar MT G003s.

Thanks! I'm thinking of 3D printing a piece that mimics the OEM design, but is shorter for the clearance. I'm hoping someone has the part number for the plastic piece so I can order one and not have to deal with having my fender liner torn apart while I reverse engineer, design, and print the...