Search results

Waterproof Rating: IP55 (fan system) Only waterproof rating I've seen.

That Reese towpower canoe loader works perfect. I just used two foam blocks for the windshield.

Just got mine set up this weekend Used the Reese Towpower 7018100 Canoe Loader Lets you load one end and rotate the canoe on to the Bronco. can be loaded solo

Any trouble with the rear tilting forward or backward? Just ordered the EZ Rack thanks for the proof it works! I think PVC will be enough strength the canoe only weighs 70 lbs and only half of that weight should be on the back...

For today to get my canoe home I used foam blocks. Tensioned the front down so the back of the canoe barely put any weight on the soft top(floating). I'll be looking at adding some type of support to my spare tire for the back.

I had thought of building something off of the rock slide engineering spare tire EZ Rack

After you wake up because you can't breathe right once 15 bucks is a small piece of mind.

I've slept in the back and in the front seats. For me the seats were better but wasn't anything wrong with the back. I just like sleeping slightly reclined better. Also when camping in winter I used a mr buddy golf cart heater in the passenger cup holder pointed toward the passenger door. You...

That orange cord is what MY badlands build has inside on it's MGV seats...

Wound up going with this one will post a pic when it gets in and on with the winch.

https://smile.amazon.com/gp/product/B07XDHS1LR/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 This one fits with no mods on our spare mount i put a wheel spacer on to move the spare back an inch

Could i get a close up of where the hoop meets the removed side bumper parts. I was thinking that would look good that way but first I've seen someone do it.

Hardest Part I had with the Winch install was messing with the sensors. If you don't have the sensors it would be a hour job tops. I still had 1 of my wires too short after un-looming them and decided to cut and add wire rather than take it all back off again. ;) Looks great Trying to Decide...

I see a lot of people saying this is how it should look from the factory. God I hope not. When I bang my plastic fender into a tree and tear it up. For a few bucks I can buy a new one and have it snapped on in under 10 minutes. With the current fenders. I'd say most of the ones saying this do...

I like that mount better but glad I did the other first now have room for both antennas

Thats awesome I just ordered one as I think I'm going to run dual antenna's 1 GMRS and 1 CB with that mount in addition to the one I built I might be able to get both mounted cleanly. Looks like the Sasquatch tire size is just enough bigger than the 33's that made a difference in your mounting.

Sorry bout that never saw the notice on the reply. Have not had any issues with the Badlands 33" tire so far been running this for 7 months. and yea I've been doing a good share of off-roading bumpy stuff

Worked up an rear antenna mount thought I would share. Bought a Jeep rear tire mount of amazon. Bolt holes were way off as I expected. So did some cutting. After getting it on I realized the tire sat too far back for the antenna to fit. So a 1 inch wheel spacer on the rear tire carrier did...

Didn't think of those. Found a jdmspeed trunk door popper that looks promising will just have to see if there is enough space for the solenoid inside the latch...

I overland / sleep In My Jeep / Now Bronco. Need a way to add an internal opener on the bronco rear door. I have a soft top right now and can reach out and get the handle to open barely (Harder than I thought it was going to be because the handle pulls up and out). When I switch to a hard top...