Search results

Excellent job!

1.256cuft

Untitled by Jon Polo, on Flickr Untitled by Jon Polo, on Flickr Untitled by Jon Polo, on Flickr Untitled by Jon Polo, on Flickr Untitled by Jon Polo, on Flickr Untitled by Jon Polo, on Flickr Bronco by Jon Polo, on Flickr Untitled by Jon Polo, on Flickr Bronco by Jon Polo, on Flickr...

Some screen shots from my two videos: -Main fuse not secured, not bolted/screwed done. Not a zip tie to be seen -sub, 4ch, and B&O amps secured with one screw each -sub wiring twisted and tapped -butchered factory B&O wiring -non secured wiring Untitled by Jon Polo, on Flickr Untitled by Jon...

The amp rack is from https://www.stereosteves.com/ I was sketchy on the time frame that i have with the Bronco to get the amp rack in time but Steve came through. He has them in stock and got it to me super quick. It fits perfectly. Bronco 911 by Jon Polo, on Flickr Bronco 911 by Jon Polo, on...

Bronco 911 by Jon Polo, on Flickr Bronco 911 by Jon Polo, on Flickr Bronco 911 by Jon Polo, on Flickr Untitled by Jon Polo, on Flickr Bronco 911 by Jon Polo, on Flickr Bronco 911 by Jon Polo, on Flickr Bronco 911 by Jon Polo, on Flickr Bronco 911 by Jon Polo, on Flickr Bronco 911 by Jon...

The kid took it to a "professional" shop to do the work. You really need to go to my Flickr account and play the two videos, then let me know what you think. Watch Car Audio Fabrication on Youtube for building the enclosure

I don't know what to say about this install other than its the worst I've ever seen. This is a kids Bronco, he's in town for the holidays from out of state college. I will be removing the amps and cleaning up everything they did to make it safe. Installing: Mobridge A2B Standard Audison 4.500...

https://audison.com/product/sr-5-600/ 4X75W @4ohms + 550W @550W

Yes, just under .60, sealed. It was good. That was stage 1 of the system. This is stage 2, Two 10TW3's at 2 ohms with 1000w, now its great https://www.bronco6g.com/forum/threads/custom-sound-system-focal-jl-audio-audison-door-speaker-mod.85422/

I have not had or heard of a problem concerning this

Right side of drivers lower dash panel. It's Audison bass control knob

Yes https://www.amazon.com/MAKERELE-Electrical-NPT-Waterproof-Connector/dp/B08R86BHBC/ref=sr_1_1_sspa?crid=19WPGCYJ37G3&keywords=water%2Btight%2Bstrain%2Brelief%2Bgrommet&qid=1701988476&sprefix=water%2Btight%2Bstrain%2Brelief%2Bgrommet%2Caps%2C158&sr=8-1-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9hdGY&th=1

3/16" ABS secured with 3M double sided tape

The 3-way Crossovers are under the drivers seat next to the 4ch amp. The door speakers are active

10 TW3's. My first setup was a single 10TW3 on 550watts from a 5Ch Audison. Now I have 2 10TW3's on 1000watts. These are my favorite subs

I did not tap into the factory connector. There is a factory grommet behind the rubber door jam "filler" trim I used. then went through the factory wire harness door grommet. There is no connector added as these doors will never come off. A deutch connector can added for door removal. There is...

https://www.mtiacoustics.net/ford.html#!/2021-Bronco-Dash-Speaker-Panels/p/503984168/category=154083001

IMG_4594 (2) by Jon Polo, on Flickr IMG_4601 (2) by Jon Polo, on Flickr IMG_4614 by Jon Polo, on Flickr IMG_4624 by Jon Polo, on Flickr IMG_4625 (2) by Jon Polo, on Flickr IMG_4629 by Jon Polo, on Flickr IMG_4630 by Jon Polo, on Flickr IMG_4631 (2) by Jon Polo, on Flickr

IMG_4542 by Jon Polo, on Flickr IMG_4538 by Jon Polo, on Flickr IMG_4543 by Jon Polo, on Flickr IMG_4546 by Jon Polo, on Flickr IMG_4547 by Jon Polo, on Flickr IMG_4555 (2) by Jon Polo, on Flickr IMG_4554 by Jon Polo, on Flickr IMG_4555 (2) by Jon Polo, on Flickr IMG_4593 by Jon Polo...