Search results

Thanks all for the responses! Going out this week to look at some more tire options. I'm thinking a load range SL or at most C would fit my needs of priority onroad ride. Narrowed it down to either 285/70 or 285/75. 285/70 has the option of SL, but I just like the looks of 285/75 better what...

Curious if you had SL rated tires and then noticed a difference running load range C as far as noise or stiffer on road ride? 285/70/17 available in SL and C, but the 285/75/17 only available in load range C and up.

Thanks for all the replies. Never really considered the 255/85/17 size as I thought it might be too skinny but then again never really saw one up close. I'll check into those. Any handling issues since that size is much taller than the stock size but same width?

Hello--must of looked through hundreds of posts but can't make a decision and need a little help. Here's my current Bronco setup: OEM wheels off a Ranger 17" +55 offset Firestone 265/70/17 Destination AT2 (very good tire so far) Looking for a more aggressive and taller tire keeping same...

Well as a follow up to my above leak, I have not taken it to the dealer yet. What I am trying is inserting a piece of foam rubber round weatherstrip along the top edge of each rear side window from the outside. Its thin enough to fit into the gap and the channel. Unfortunately no rain test yet...

Interesting...were you ever able to track down what caused the rattle--loose clip or is it just the subwoofer/enclosure? I wouldn't want a bunch of vibrations and rattles from the sub. I don't have any vibrations problems with the 8" kicker in oem location currently.

Hi, Currently have 8" kicker sub upgrade in the oem enclosure cargo area of my 2door. Rounds out the bass but power corrupts and I want a little more. Researching both the Gearshade 10" kicker box or a downfire sub box with 10" kicker sub. Any thoughts as to which way to go? Downfire sub box is...

Great thank you for the responses!

Hello, 2025 Bronco base 2dr. Looking to install a 10" downfire subwoofer in the rear cargo area. Already have amplifier mounted up front so just need to run speaker wire. 1. Any thoughts of best way to run the speaker wire? Was thinking of just running under the side panels to the rear. 2. Are...

Good information. Let us know what you find. My clicking is on the driver seat and seems to get worse the farther back I recline the seat. Not sure what that means though.

Hello. Add me to the unfortunate window leak group. 2025 Bronco base 2dr about 5k miles. Just noticed this after we had significant rains here in SoCal. Both driver and passenger rear hardtop windows. Appears to be leaking somewhere along the top of the window inside and then dripping down onto...

Ok thanks. It looks like everyone has a different order. Looks like Ford manual has the main hook clamp first then the three L latches after that but I guess whatever works to keep the water and noise out! Thanks for all the replies.

Hello. 2025 Bronco 2dr base. On reinstallation of the driver/passenger front top panels, does it matter if I secure the L-latches first and then the large latch behind the sun visor....or does it really matter what order we reinstall ? Reason I ask is because I have a very small water leak...

Thanks for all the replies! Yes, I actually loosened all 4 seat bolts and then re-torqued to specs. Unfortunately clicking noise is still there. Looked underneath the seat bottom and couldn't see anything obvious. Tried putting seat into different positions but the sound remains.

Hello, 2025 Bronco 2door base. The driver seat started to make a slight clicking sound when I shift my butt on the seat or when my weight shifts on the seat like going around tight turns. Not too loud right now but noticeable if radio off. Didn't notice it when new and now has about 3200 miles...

Great thanks for the additional suggestions! Yes speed comp option is currently off. Tried gain reduction on dash channels output but that just made vocals fade into background and dull if that makes any sense. Will try 5-7db cut in the 1.5-2.5khz range.

Great thank you. Yeah it's a Helix 4" i3 coax which was recommended. I'll play with with the 3-7khz range. It's just frustrating because when parked or low speed it sounds pretty good, but once you get higher speed some songs just become unlistenable. Thanks!

Thank you for the suggestions. Let me also ask if crossover changes should help. Currently 4" coaxial is 200hz-20,000 and midbass is 80hz-200hz. Would moving from 200 to 300 be beneficial as far as taming some of the brightness from the dash or not really? thank you.

Thanks for the advice and house curve examples. Was able to download some samples off diymobileaudio as well. Main problem I'm facing right now is that the dash aftermarket coaxial speakers are too bright/harsh while driving. Any suggestions as to which frequencies to cut or how to modify house...

Hello. Just getting started in tuning the Musway DSP in my Bronco. Can anyone recommend a house curve as a starting point? Using REW software. Thanks!