Yes, that is the method prescribed by Ford. The mechanic that worked on mine did not do this however. He dismantled the grille, fenders, etc and performed the work that way. 10k miles later and running great.
Mine is all done. No more rattle! It took them 4 days to complete the fix. I haven't noticed any differences in engine performance or anything. Just glad the rattle is gone.
Iād say yes you could modify them to do this. It would require hacking the harness in half and running all new wires to both powered Aux switches. A lot of work but doable.
No, they do not use the built in light switch. That switch is on the CANBUS circuit which these light do not tap in too.
many that have the overhead upfitter switches, tie in to the aux6 switch in order to have the ability to turn the lights on and off at will.
No idea if they plan on...
Welp the wifey had a thing or two to say about the dome lights and door activation. She said āweāre only getting older and will need the lights on when the door opensā. So, not wanting to get on the wrong side of the misses, I decided to dive back in and find the correct gray/purple wire called...
Mine doesnāt have to go that long. It will do it within 2 hrs.
Dealer called me other day. The parts are in and my Bronco goes in for the repair on 3/13. They expect it to take all week as the engine has to be pulled to perform the repair. Iām a little nervous because this their first Bronco...
IAG called me in the meantime. And yep, the wire I tapped into apparently has a brown stripe which with my lighting in that tite spot looked purple. IAG even said itās really easy to confuse that wire with the correct one. I believe the correct wire is more of a light gray and yes, as stated...
Hi all,
Iāve ran into an issue with the installation and was curious if anyone else ran into this problem. When tapping in to the power source for the lights, the instructions state to connect to the gray wire with purple stripe in the wire harness near the fuse box. Well, Iāve done this and the...
Hi all, my ā22 2.7l has developed a very pronounced rattle during cold startup. It lasts roughly 4 or 5 secs before the noise drops out. It sounds like a Diesel engine. I have a service appointment scheduled with my Dealer. Anyone else experiencing this? Is this a Cam phaser issue? TIA
Has anyone found a spray aerosol paint that is an exact match for the Sasquatch wheel beauty ring? I kind a did a thing over the weekend and have some rash one of my rings. The good news is the Bronco is a rock crawling beast!!