Soft top opens and closes without any issues. As for golf clubs, a full staff bag will not fit unless you fold the trunk flat and put a seat down. I am able to get me cart bag and my wife’s stand bag in laying diagonally with the trunk in place. Hope this helps.
Yes. It’ll have nutserts installed for the mObridge bolt pattern. You’ll need to use the mounting screws supplied with the mObridge amp rather than the screws that come with the enclosure. The heads on the screws mObridge supplies are flat allowing for the connectors to plug in on the amp. You...
No, I removed the factory sub enclosure and replaced it with the GearShade sub enclosure. It bolts in thru the back and a bracket on top. I does go in place of the factory sub enclosure and fits behind the trim panel.
It’s fairly simple. You have to run the supplied battery cable to the battery under the hood. If you have an automatic transmission, there’s a grommet already in the firewall to utilize for this.
The only other wiring to run is a “T” harness to the dash. Easiest way is down the passenger side...
1. Yes, I used Killmat 5mm thick sound deadening material on the entire inside of the enclosure. Then loosely filled with poly fill.
2. Yes you need wire to go brim the terminal connector on the end of the enclosure to the woofer itself. The mObridge kit comes with a long lead of wire for the...
I purchase the dash plates off eBay. They we $30. As for the center channel, yes the mObridge will sum L and R to upmix the center. Or you can opt not to run a center channel. Your option.
Just completed my audio system upgrade in my 24 Wildtrak 4dr. I went with the GearShade enclosure and 10” Kicker Comp RT mounted in the factory location. I ordered the enclosure with the accommodation for mounting the mObridge amp/dsp. I added Killmat to the interior of the enclosure along with...
I did the Aamp Smart Steps on my 24 Wildtrak 4dr. Main reason was so I could deploy and retract them with the phone app when the doors are off. They work flawlessly. Been installed approx 8 months.
Not sure. If you bolted it down ontop the slide out to the cargo tie down point I would suspect the sidewalks would be too tall. When bolted to the floor, the height it flush with the top of the tub rail. You may be able to remove the slide out (all 8 bolts), install the side panels using 4...
Haven’t heard anything yet. One thing I did notice is the factory subwoofer is non-existent with the trunk deployed. Audio upgrade is now next on my list. Lol
Update: just finished installing the IAG EZ Lift and EZ Pull. Works with the EZ Trunk without any modifications. I know there was a thread on modifying the slipstream to work with it but with EZ 4x4’s trunk, no need to.
Update: Just wanted to let everyone know that the IAG EZ Lift and EZ Pull combo kit will work with the EZ 4x4 Trunk without any modifications. Just finished installing it.