2025 Bronco base build

[jwhisl]

Double check with those in the know, but I don't believe there is any reason to swap to the Sasquatch UCAs, they are the same as regular.

I can confirm that the lug nuts and upper control arms are the same

Sponsored

 

[jwhisl]

I did some sound deadening over the weekend and installed the flowmaster outlaw catback. Too loud for my taste so I'm looking to trade for the flow fx or similar

 

[Panda Motorworks]

Enjoy your build journey!

If you are interested in more parts for your Bronco, Panda Motorworks offers lots of Bronco items!

Here is a link;
https://www.pandamotorworks.com/search?options[prefix]=last&q=Ford+Bronco&filter.p.product_type=

 

[jwhisl]

Very interested! Waiting for tune options and an intake setup for the 2025. I'll check out the site to see what else you offer.

Enjoy your build journey!

If you are interested in more parts for your Bronco, Panda Motorworks offers lots of Bronco items!

Here is a link;
https://www.pandamotorworks.com/search?options[prefix]=last&q=Ford+Bronco&filter.p.product_type=

 

[Panda Motorworks]

Very interested! Waiting for tune options and an intake setup for the 2025. I'll check out the site to see what else you offer.

Awesome!! You can always message us if you have any questions!

 

[jwhisl]

I scored a capable bumper with foglights, wiring, and skid plate and got it installed yesterday. Today I started installing my 3d printed door pockets. Tomorrow the headlight switch with foglight buttons arrives

 

[jwhisl]

Installed a protester protector and did a little more sound deadening in the back behind the subwoofer enclosure. I also made the hole a little larger and installed a CT Sounds Bio 8. 300 watts rms and can be ran by the factory amp until I get a full day to run my power wire and install a real amp.

 

[jwhisl]

For those wondering, the factory enclosure has just a hair under 4 1/4 inch depth. That limits us to low power and shallow subs but there are a few out there.

 

[23OBX2.7]

I don't necessarily have a need for the lockers right now so they may never happen. I bought it from a dealer, not built on the ford site. I would have loved to customize one but where's the fun of having everything done for me?

IMO as an off road dirtbiker any terrain thats extreme enough for lockers will be very hard on the overall vehicle.

 

[jwhisl]

What are the Sub specs?

300rms/600peak. I've been using this brand for years and they are underrated on power. I can get the rest of the specs for you real f you need them. Also if you move up to an 8" you will want a gasket or adhesive between the box and sub. The original screw holes will leak air and make noise.

 

[jwhisl]

Brand new tires this time. 285/70/r17. I got a great deal at $800 installed for the set. Still need to get the spare done but they had to order it. Anyone got an extra TPMS sensor?

 

[jwhisl]

A couple weeks ago I finally got around to taking the entire top of and getting my Temu rear speaker pods installed with some Sony ES series 6.5's No pictures of the pods yet but they are identical to the Mabett option. Also got my Temu armrest cover. It fits pretty good for Chinese plastic! It has a nice rubbery feel to it. For less than $20 I really can't complain.

I was without my bronco for a few days when the driver side CV knuckle decided to separate at the diff. The dealer tried to say I hit a rock but honestly I think they were just trying to get out of the repair. It was all covered under warranty but just in case I went and ordered some skid plates for the lower control arms. Considering I drove it another 140 mi with no issues after my last off-roading, I really don't think I damaged it.

 

[jwhisl]

These are the skid plates I went with. For the price it's well worth the piece of mind that All the spinny bits underneath will be protected. https://www.extremeterrain.com/prod...s8301&showFeed=True&customerpics=true&index=0
I should be getting them by the third so I will update with ease of install and overall fitment.

Edit: This is a customer photo I borrowed from their website

Sponsored