- Joined
- Sep 14, 2023
- Threads
- 3
- Messages
- 34
- Reaction score
- 37
- Location
- California
- Vehicle(s)
- Bronco big bend
- Your Bronco Model
- Big Bend
- Thread starter
- #76
thank you for the feedback.I bought one of these recently, last night I tore it down just to inspect assembly and quality. I was surprised at how well built this unit is. Everything was well lubricated, the fasteners were all tight and I was impressed with the electronics. The cables going into the motor are sized correctly for amperage, having the pressure switch is good and unexpected. I was prepared to modify the compressor and add my own. The pistons and rings appeared to be robust, I couldn't get into the rod bearings to inspected lubrication. The screws holding the bearing plate on were too tight for me to risk stripping out the heads on the screw but everything was tight and there was no bearing play. The 25ft hose is a nice accessory too. All in all I'm pleased with my compressor and I think whomever your winners are will be impressed with the capability of the unit.
Sponsored