Looking for advice on a spacer for a spare wheel

[evgenyvasenev]

Today I replaced stock Sasquatch wheels with Method 703 +30 offset and 35/12.5 Mickey Tompson Baja Boss A/T. Everything looks fine except the spare tire. I couldn't put it back. It looks like the hub is a little bit further. Maybe about 1/2-1/3 in, but I couldn't put it on bolts as the tire touches the 3rd brake light holder. What should I do? Put a spacer? Any advice?

Sponsored

 

[2020FordRaptor]

Today I replaced stock Sasquatch wheels with Method 703 +30 offset and 35/12.5 Mickey Tompson Baja Boss A/T. Everything looks fine except the spare tire. I couldn't put it back. It looks like the hub is a little bit further. Maybe about 1/2-1/3 in, but I couldn't put it on bolts as the tire touches the 3rd brake light holder. What should I do? Put a spacer? Any advice?

Spacer would work. I would think at least.

 

[evgenyvasenev]

Thanks. I have done some search and found a thread about the same problem. It was solved by cutting rubber bumpers. I did the same (cut off about 1/4 in) and it works just fine.

Sponsored