Morimoto 1 Banger Cornering Lights installed

[ThunderFlash]

Mounted a set of Morimoto 1 Banger combo beam lights on top of my crash bar mounts to serve as cornering lamps and wired into my fog light switch. With the extra clearance of a ADD Rockfighter bumper it projects light were I wanted it. The positioning is a bit vulnerable, but I'm hoping they can hold up to the abuse. I may 3D print a shield for them, though. The combo beam has a nice spread to it with a brighter area towards the middle. Very nice lights. The little dudes feel robust and the mounts are stout with a beefy, large torx headed carriage bolt for mounting. The T-20 Torx screws on the sides for the pivot point and angle adjustment seem to hold very well. Have some issues with the FORscan programing for cornering functionality, but I think I can get that resolved. Light pics are headlights only - 1Bangers only - both. I have the right one angled slightly more outward since right turns tend to be sharper.

Sponsored

 

[MachingBird]

Mounted a set of Morimoto 1 Banger combo beam lights on top of my crash bar mounts to serve as cornering lamps and wired into my fog light switch. With the extra clearance of a ADD Rockfighter bumper it projects light were I wanted it. The positioning is a bit vulnerable, but I'm hoping they can hold up to the abuse. I may 3D print a shield for them, though. The combo beam has a nice spread to it with a brighter area towards the middle. Very nice lights. The little dudes feel robust and the mounts are stout with a beefy, large torx headed carriage bolt for mounting. The T-20 Torx screws on the sides for the pivot point and angle adjustment seem to hold very well. Have some issues with the FORscan programing for cornering functionality, but I think I can get that resolved. Light pics are headlights only - 1Bangers only - both. I have the right one angled slightly more outward since right turns tend to be sharper.

Nice! Got a link to where you got them?

 

[Squirrel13]

Cool. I did the same thing with a pair of BD S1 with the trail lens. They are tucked back somewhat protected by the skid plate.

 

[MachingBird]

Cool. I did the same thing with a pair of BD S1 with the trail lens. They are tucked back somewhat protected by the skid plate.

You got a pic up those lit up at night?

 

[Squirrel13]

Not now but I will snap one for you in the morning!

 

[MachingBird]

Not now but I will snap one for you in the morning!

I would appreciate that. Thanks.

 

[Squirrel13]

I would appreciate that. Thanks.

Here are some quickies from a totally dark garage. This is only the pair of S1 nothing else

 

[MachingBird]

Here are some quickies from a totally dark garage. This is only the pair of S1 nothing else

That’s impressive. I am really partial to the Baja designs. I have an S1 in my trailer receiver that is amazing, all by itself.

 

[MachingBird]

That’s impressive. I am really partial to the Baja designs. I have an S1 in my trailer receiver that is amazing, all by itself.

Did you wire those to come on with your turn signal and enable them with forscan?

 

[Squirrel13]

That’s impressive. I am really partial to the Baja designs. I have an S1 in my trailer receiver that is amazing, all by itself.

They’re on an upfitter switch. The SAE white driving are on the factory button.

These are the S1 trail. Meant for motorcycles I guess .
https://www.bajadesigns.com/products/s1-with-trail-lens-led-auxiliary-light-pod-universal/

 

[ThunderFlash]

Nice! Got a link to where you got them?

MachingBird, link is below

Tonight was the first long drive with them and they worked great. I used FORscan to make them work as cornering lights. The inside light comes on when the headlights are on and the wheel is turned. I also have the inside light coming on with the turn signal. They only illuminate at 25 mph or less. You can also just turn them on as fog lights. It's cool. I think I'll make changes to allow them on with high beams, too.

@Squirrel13, I like your set up as well. The skid plate makes a nice guard for them.

https://fueledutv.com/products/morimoto-1-banger-led-pods-hxb-combo-beam

 

[HighVelocity]

Cool. I've considered doing the same with a pair of Nacho Nanos.

 

[dangerfoot]

Tonight was the first long drive with them and the worked great! I used FORscan to make them work as cornering lights. The inside light comes on when the headlights are on and the wheel is turned. I also have the inside light coming on with the turn signal. They only illuminate at 25 mph or less. You can also just turn them on as fog lights. It's cool. I think I'll make changes to allow them on with high beams, too.

@Squirrel13, I like your set up as well. The skid plate makes a nice guard for them.

https://fueledutv.com/products/morimoto-1-banger-led-pods-hxb-combo-beam

Very cool. Would love a tutorial on the forscan side.

 

[ThunderFlash]

Very cool. Would love a tutorial on the forscan side.

There is a pretty good tutorial stickied under the FORscan directory. That's what I followed after reading a lot of posts. It's pretty easy and straight forward, but if you have any questions, I'm NO EXPERT, but can try to help.

 

[dangerfoot]

There is a pretty good tutorial stickied under the FORscan directory. That's what I followed after reading a lot of posts. It's pretty easy and straight forward, but if you have any questions, I'm NO EXPERT, but can try to help.

Thanks man. I'll wander over there, although my FORM projector really solved this problem for me.

Sponsored