Part #s for the parking sensor grommets for the capable front bumper? Part #?

[Function_7]

Does any know the part #s for the parking sensor grommets for the capable front bumper? Im hoping I can buy just the grommets and not the whole set of sensors
Bonus points if anyone can point me to an easy place to find them
Cheers

Sponsored

 

[Ducati1098]

Right outer: M2DZ-15A862-CA
Right inner: M2DZ-15A862-CC
Left inner: M2DZ-15A862-CD
Left outer: M2DZ-15A862-CB

What bumper do you currently have? I can see if your sensors are the same.

 

[Function_7]

Right outer: M2DZ-15A862-CA
Right inner: M2DZ-15A862-CC
Left inner: M2DZ-15A862-CD
Left outer: M2DZ-15A862-CB

What bumper do you currently have? I can see if your sensors are the same.

Thanks! I currently have the standard plastic bumper and I’m upgrading to the capable. From what I understand they are not the same, but could cut some plastic tabs to get them to fit.
if you don’t mind doing a definitive check for me though, I’d appreciate it

 

[Ducati1098]

Thanks! I currently have the standard plastic bumper and I’m upgrading to the capable. From what I understand they are not the same, but could cut some plastic tabs to get them to fit.
if you don’t mind doing a definitive check for me though, I’d appreciate it

You’ll need 2 new outer sensors which are LU5Z-15K859-CA

2 of your factory sensors will work correctly for the inners ones on the capable bumper.

 

[Carfan1965]

Can you tell me why the sensors don’t work straight across?

 

[Function_7]

Can you tell me why the sensors don’t work straight across?

It’s the way the sensors plug into the harness— they are at a right angle and will not fit certain nooks and crannies on the capable bumper, and the harness won’t reach. The replacement sensors will give you the clearance you need to make it work.

 

[Carfan1965]

It’s the way the sensors plug into the harness— they are at a right angle and will not fit certain nooks and crannies on the capable bumper, and the harness won’t reach. The replacement sensors will give you the clearance you need to make it work.

Thanks f the info. I think I bit off more than I should have on changing bumpers.

 

[Carfan1965]

Are all 4 sensors the same part # and interchangeable?

 

[Function_7]

Are all 4 sensors the same part # and interchangeable?

it’s been a minute since I did the swap, so my memory is fuzzy, but I don’t think all 4 are the same part number. I purchased 2 new outer sensors (LU5Z-15K859-CA) which will connect directly to your harness at the outer locations. I recycled the inner sensors.
As for biting off more than you can chew, I’d say no. Once you have the 4 proper grommets, and 2 new sensors the job is very easy and straightforward.

Sponsored