Rear Window Molle Panels

[JustWideman]

Quite some price swing with even cheaper ones on Amazon. For something I will set and forget I'll go with the cheapest 4D ones as I just don't want people breaking my windows to get my camera stuff, not so much for gear hanging off.

Sponsored

 

[J-Lugster]

Broaddict also.

I see you had to do some cutting on the metaL with the Broaddict to unblock the electrical harness storage port. Was that a big job?

 

[Koss_co]

I didn't have to cut anything. It already came cutout from broaddict ready to go!

 

[J-Lugster]

I didn't have to cut anything. It already came cutout from broaddict ready to go!

Oh OK. I guess Broaddict must have made some tweaks to it then because someone on Amazon posted a review and mentioned that the port gets blocked by the molle panel. This pic was from the review.

 

[Koss_co]

Weird. That almost looks like it's mounted too high. Ingot mine from broaddict directly. Are they sure the Amazon ones are legit?

 

[J-Lugster]

Weird. That almost looks like it's mounted too high. Ingot mine from broaddict directly. Are they sure the Amazon ones are legit?

Ya it is Broaddict definitely. This guy also did a review and you can see the same thing and you see the Broaddict logo on it at a couple of spots during the video. He starts talking about the issue around 9:57 in the video.


This video shows it blocked as well.


I noticed with your Molle panel that the piece of the frame of the metal is not there (see the pic below) so maybe Broaddict has addressed this.

Maybe BA OffRoad can comment.

 

[Koss_co]

They must've. I ordered mine on July 25th this year from them. Had no issues.

 

[SCORPSCPO]

I went with TOR molle panels, no complaints

I’ve got these also, but does anyone know of a company that makes molle adapters to fit the rather large squares TOR has on their panels? I also installed the outside rear window panels for traction boards and Rotopax, but am having a hard time finding mounting solutions that will work with my cheap Amazon boards.

 

[HPNQ420]

Been looking at a few options for these to store some things living on the trunk floor higher up. Anyone try some of these out?

• https://mountains2metal.com/rear-roll-bar-molle-for-4-door-bronco/
• https://www.broaddict.com/products/4-door-rear-window-molle-panel-system
• https://dv8offroad.com/collections/...ducts/6th-gen-bronco-molle-panels-rear-window
• https://www.extremeterrain.com/turn-offroad-bronco-rear-window-molle-panels-ia1-rw4.html?utm_content=XT Interior - Storage|Turn Offroad&T5_Var4=FB30097&srsltid=AfmBOorZmRXFIa3e-CKxmyUgU-d9GXr8TIpLynnoKnQO7uN-N_SXn_kZsGQ

M2M for me.

Anything that used the hard top bolts was a non-starter for me. I like to take the top off, and basically all of my recovery gear hangs from these.

M2M gives good clearance to get to the hard top bolts as well.

Fit and finish could not be better. Packing for shipping was good.

Also, no Chineseium. Although I am not opposed to good Chineseium most of it is fair to poor.

 

[redone17]

Why go with any brand outside of Turn Off-road? $141 shipped for a pair! I’ll probably only use the passenger side for my Bluetti Charger 2 (and additional gear storage). But, having the driver side laying around for longer trips ain’t a bad deal.

Sponsored