Show us your installed wheel / tire upgrades here! (Pics)

[Kedward]

2021 Ford Bronco Big Bend with 2" Spacer/Lift Kit from Rough Country, 315/70/R17s

what wheels are they, nice look, clean

Sponsored

 

[cksov1]

I’m loving these wheels and tires. When I search for 17” 6x139.7’s for the Pro Comp 69’s it says they don’t work on the Bronco. I know I need to call them to verify, but just for reference, can you provide the specs in your wheels including bore size? Many thanks.

Here is the link to my wheels.

https://www.4wheelparts.com/p/pro-c...pattern-polished-1069-7983/_/R-BKBQ-1069-7983

 

[JoshuaPrieto]

what wheels are they, nice look, clean

ION 171

https://www.discounttire.com/buy-wheels/ion-alloy-171

 

[Hokie_98]

Here is the link to my wheels.

https://www.4wheelparts.com/p/pro-c...pattern-polished-1069-7983/_/R-BKBQ-1069-7983

thanks!!

 

[ebr]

What tires are you running, MT's?

They are Nitto Recon Grappler ATs.

 

[Kedward]

what wheels are they, nice look, clean

ION 171

https://www.discounttire.com/buy-wheels/ion-alloy-171

Thk u!

 

[BoneyRoads]

fifteen52 Traverse HD

 

[Kev2nice]

 

[zuke]

Zone Off-road Adventure 3" for Badlands.

Pro Comp Series 69 Wheels,
17x9, -6 Offset

Maxxis Razr AT 811
37x12.5r17
Load Range D

Comparison Shots, My Jeep JKU with 3.5" Metal Cloak on Raceline Beadlocks and 37x13.5 Yokahama X-MTs

Zero Rub with -6mm offset Pro Comps, and just the right amount of Poke for me, though I know some here don't like poke, For those I think a set of Sasquatch Fenders would cover it just right...

 

[lapazleo]

American Racing Outlaw II's. 17X8, +18mm offset, 5.21 BS. Stock flares, no lift. 1" Leveling kit going in soon.

Nice. What push bar do you have?

 

[Dez]

Nice. What push bar do you have?

It's the Rough Country Nudge Bar. I also have their shackle conversion to replace the tow hooks.

 

[lapazleo]

It's the Rough Country Nudge Bar. I also have their shackle conversion to replace the tow hooks.

Thanks thats a big help.

 

[CyberVegas]

37” Mickey Thompson Baja boss a/T. 3” icon lift, rpg tie rods, broncobuster steering rack bushing

 

[CactusClub]

 

[Dez]

Thanks thats a big help.

Install is straight forward but just be careful during the install and do one side at a time. One set of instructions says to do it that way while the other just says to remove both brackets. The factory tow hook brackets also hold up the inter cooler so doing one at a time will prevent any unwanted headaches.
There are some good install videos on their website as well.

Sponsored