Show us your installed wheel / tire upgrades here! (Pics)

[Kahlua]

2 inch zone with Icon's and BFG 35s

This is a stunning setup. Im not as familiar with the icon wheels...are these the Alloy Rebound Pro 17x8.5 wheels? What's the offset?

Sponsored

 

[VIRUS]

This is a rebound pro

 

[71to21-2DR]

This is a rebound pro

they got a new one now just like that but without the bolts

 

[Alpinedog]

This is a stunning setup. Im not as familiar with the icon wheels...are these the Alloy Rebound Pro 17x8.5 wheels? What's the offset?

These are Icon rebound, not the pros, in my OP, they are way better than the pros.....

 

[Discount Tire]

This is a rebound pro

Definitely a sleeper BL with the no rivet/bolt lip.

 

[4avor8ntfair]

I'm probably in the minority here, but I actually really like my Non-Sas Badlands setup. However, with so few wheel options for us Non-Sas folks that don't poke out like crazy, I'm now thinking I should have just scooped up the optional non-Sas Badlands wheels at purchase. I also want to run the factory 33s. Heck at the price of wheels (and Sas fender if I need them), I should have just put Sas on the rig.

The only wheels I've found that don't poke over an inch from stock fenders are:
Black Rhino Warlord 17x8 +52 (0.11")
Black Rhino Fuji 17x8 +38 (0.67")
KMC Canyon 17x8 +35 (0.787")
KMC IMpact 17x8 +35 (0.787")
Method 703 17x8.5 +35 (1.02")
_________________

Poke over an inch:
RTR Evo 6 17x9 +30 (1.49")
Black Rhino Boxer 17x8.5 +18 (1.92")
Rouch R Series 17x8.5 +25 (1.417")
KMC Trek 17x8 +20 (1.377")

What other wheels are going to keep me to an inch or less?

I've spoken to a few powder coat places and they are $700-900 to color change my Ford Badlands wheels. Am I being impatient, or do I just need to wait for the market to catch up?

To the wheel designers at Ford. Take a look around EBay. The large number of factory OBX and Badlands wheels is a good indication of the success of the design language. I actually really like the styling of the Badlands wheels, the finish of carbon grey and machine finish is an odd choice.

I love my non-SAS Badlands too. I added 1.5” spacers to clear a Zone UCA, that I had installed with the Zone 1221 kit. IIRC, the 1.5” spacers effectively make it +18 offset.

 

[wanna1]

These are Icon rebound, not the pros, in my OP, they are way better than the pros.....

Why do you think they are better?

 

[Alpinedog]

Why do you think they are better?

The black ring looks great with my setup, nothing about the performance....

 

[ATLBronco75]

2 inch zone with Icon's and BFG 35s

When I first saw this picture I thought the ski lift was the world's biggest Roof Top Tent. LOL

 

[DesertEagle1776]

When I first saw this picture I thought the ski lift was the world's biggest Roof Top Tent. LOL

It really does look like that though. lol

 

[Alpinedog]

When I first saw this picture I thought the ski lift was the world's biggest Roof Top Tent. LOL

HA!

 

[69stang]

that's one of the nicest set ups yet! well done

I have the exact same wheels did you have to use a hub ring for them to fit or just bolt on? I was sold a set of hub rings but it doesn't clear center cap any input would be appreciated!

 

[Discount Tire]

I have the exact same wheels did you have to use a hub ring for them to fit or just bolt on? I was sold a set of hub rings but it doesn't clear center cap any input would be appreciated!

Hopefully @BroncoJerm doesn't mind me chiming in on this one.

This particular Rockcrusher would be lug centric, which is completely fine. Wheel models that utilize a push through the back center cap can not accept a hub centric ring.

 

[69stang]

that's one of the nicest set ups yet! well done

I have the exact same wheels did you have to use a hub ring for them to fit or just bolt on? I was sold a set of hub rings but it doesn't clear center cap any input would be appreciated!

 

[69stang]

Awesome thank you for responding! My bronco is a week out finally! I'll be installing these wheels as soon as I get it

Sponsored