Some Upgrades On My 2023 Badlands

[Nacho The Bronco]

Just completed some upgrades.

- Unbranded front and rear bumpers.
- Unbranded rear license plate relocation kit.
- Mountain 2 Metal front camera relocation kit.
- Warn VR Evo 10-S winch.

Used DT Connectors for weather tight electrical connections.
Rope is pretensioned and ready for action!

Tried my best to hide all wires for a clean install.

Sponsored

 

[DeepBronco]

Just completed some upgrades.

- Unbranded front and rear bumpers.
- Unbranded rear license plate relocation kit.
- Mountain 2 Metal front camera relocation kit.
- Warn VR Evo 10-S winch.

Used DT Connectors for weather tight electrical connections.
Rope is pretensioned and ready for action!

Tried my best to hide all wires for a clean install.

Looks like a clean install. Is the forward crash bar required to remain?

 

[Nacho The Bronco]

Thank you. I took my time to do my best!

Currently I’m looking for crash bar alternatives, didn’t anticipate them sticking out that far.

Something like this…
https://lobooffroad.com/product/crash-bar-erase-brace-kit-bronco/

 

[Skernie]

Can you provide links to where you got the bumpers?

Thanks.

 

[Nacho The Bronco]

They are both unbranded from eBay. I’m very pleased with their build and quality.

Front bumper ( I offered $400, they countered with $439.00. So I just offered 430 and they accepted ) https://www.ebay.com/itm/196042839711

Rear bumper ( I offered $300 and they took that offer with no counter ) https://www.ebay.com/itm/364559747147

There are many sellers on eBay with the same bumper.

 

[Skernie]

They are both unbranded from eBay. I’m very pleased with their build and quality.

Front bumper ( I offered $400, they countered with $439.00. So I just offered 430 and they accepted ) https://www.ebay.com/itm/196042839711

Rear bumper ( I offered $300 and they took that offer with no counter ) https://www.ebay.com/itm/364559747147

There are many sellers on eBay with the same bumper.

Thank you I will check them out.

 

[SmilingSasquatch]

Looks beefy! Is it realistic to instal the front bumper by yourself or do you need extra pair of hands to hold and align it?

 

[Nacho The Bronco]

The outer shell is. 3 mm (1/8 inch)
The inner support that goes to the bumper mounts is 5 mm (3/16 inch)

I installed both bumpers by myself.
Recommend getting something like this for wire management. https://a.co/d/eu52tMO

Sponsored