StickerFab - DIY Window Tint Kit

[BroncoBoy22]

Going to pickup a set thanks! I’m sure local shops would charge $300 for this

Sponsored

 

[japont4]

Hey there, I'm thinking of grabbing one of your kits, but I've got a question. Can we have an option for 50% tint on the rear side glass and 35% on the fronts? I'm asking because I know the rear doors are dyed rather than tinted which lack the UV protection.

I don't want to go too dark at the back with the factory dye combined with the 35% tint on the rear windows.

Edit: Or even do 70% if available

 

[Bellime]

Are these tint kits applied from the inside or outside?

 

[StickerFab]

Hey there, I'm thinking of grabbing one of your kits, but I've got a question. Can we have an option for 50% tint on the rear side glass and 35% on the fronts? I'm asking because I know the rear doors are dyed rather than tinted which lack the UV protection.

I don't want to go too dark at the back with the factory dye combined with the 35% tint on the rear windows.

Edit: Or even do 70% if available

Hi! If you choose your model on the product page, you should then be able to pull up different sets. Just choose them separately. Let me know if this doesn't work properly. I thought it did when I checked.

Are these tint kits applied from the inside or outside?

Inside. It is normal tint. I have an install video of the front windows.

 

[StickerFab]

https://www.stickerfab.com/products/front-window-easy-tint-kit-2021-bronco?variant=47929970819391

Two templates added:

 

[japont4]

Hi! If you choose your model on the product page, you should then be able to pull up different sets. Just choose them separately. Let me know if this doesn't work properly. I thought it did when I checked.



Inside. It is normal tint. I have an install video of the front windows.

You are absolutely right. However, I forgot to mention in the previous comment that I was looking for the ceramic tint. The options I see for ceramic are only 25%.

 

[StickerFab]

Can I get anyone to second the request for 50% ceramic? Actually it would be 45% for ceramic. They do vary a little versus the standard tint.

We're willing to do anything that doesn't leave a whole roll on the shelf for years for lack of interest.

Thanks

 

[KillerPenz]

Can I get anyone to second the request for 50% ceramic? Actually it would be 45% for ceramic. They do vary a little versus the standard tint.

We're willing to do anything that doesn't leave a whole roll on the shelf for years for lack of interest.

Thanks

I would consider 45% ceramic. I don't like the dash glare from the inside that my wife's Jeep has, so I'd prefer less tint, but something that isn't clear like the windows are now.

 

[StickerFab]

@japont4 @KillerPenz

Added 45% ceramic! Sorry it took a bit.

https://www.stickerfab.com/products/front-window-easy-tint-kit-2021-bronco?variant=47795635061055

 

[KillerPenz]

@japont4 @KillerPenz

Added 45% ceramic! Sorry it took a bit.

https://www.stickerfab.com/products/front-window-easy-tint-kit-2021-bronco?variant=47795635061055

Order placed. Thanks again.

 

[StickerFab]

Order placed. Thanks again.

Thank you!

 

[KillerPenz]

Thank you!

Well, I hate to say it... but..... passenger went on smooth as silk. And of course as soon as I switched to the driver's side, get everything soaked, peeled off tint and a light gust of wind swooped in! Stuck to itself and creased the hell out of it . Tried my best to remove creases and eventually tore it off in frustration. Sucks not having a garage to work in.

Anyways, I will say this, the 45% ceramic does seem to be a bit on the light side for me. For now I'm going to rock the passenger side tint, see how I like it for a week or 2, then probably re-order either the 45% ceramic, or maybe drop it down to 30% normal. Either way it looks like a great product, simple to use, but definitely need a NO WIND day or a garage to do it in.

BTW, if I do stick with the 45% ceramic is it possible to get (2) driver's doors? Being as the passenger went on just fine?

 

[StickerFab]

Ah yes the dreaded wind. Even in my install I wish I had another person to help hold it. Any breeze is a pain.

We can setup a custom order and get you two driver's side no problem. The pieces are so big that we have to print it one set at a time anyways.

 

[KillerPenz]

Ah yes the dreaded wind. Even in my install I wish I had another person to help hold it. Any breeze is a pain.

We can setup a custom order and get you two driver's side no problem. The pieces are so big that we have to print it one set at a time anyways.

That is awesome to hear. Just give me a couple of days to see how I like the 45%. I'll definitely place another order in the next day or two. And I'll reach out to you if I decide to go with the (2) driver's doors.

 

[KillerPenz]

I will add to his, I may just go to 30%, kind of wish you had a darker ceramic. Look at the difference in my windows, driver (no tint) vs passenger (45% ceramic). Though in the end I don't want all the interior glare so maybe 45% wins out.

Sponsored