Wiring problem installing M&R fogs

[fv9]

Installed the lights but no joy. I connected the grounds to the modular bumper bronco bolts. The ones below the lights and facing outward as I couldnt find anything else accessible. Then ran the red wire to the aux wire violet/green for switch 3. Tested it for white lights and nothing. I didn’t hook up black yet for amber but I don’t think that shouldn’t matter. Any ideas?

EDIT: Figured it out. Thanks!

Sponsored

 

[bradcd]

What kind of connector do they give you in that package to tap in to the aux wire? I have the Baja Designs pocket light kit and their pinch connector needs to be clamped down hard and snap to fully seat the wire. Could be that you're just not fully connected yet.

 

[fv9]

I figured it out. Connected to a 10amp wire and it needed 15. Thanks!

 

[MandRautomotive]

Post pictures

 

[MyWifesNameIsHonda]

Installed the lights but no joy. I connected the grounds to the modular bumper bronco bolts. The ones below the lights and facing outward as I couldnt find anything else accessible. Then ran the red wire to the aux wire violet/green for switch 3. Tested it for white lights and nothing. I didn’t hook up black yet for amber but I don’t think that shouldn’t matter. Any ideas?

EDIT: Figured it out. Thanks!

Pics or it all didn’t happen

Sponsored