- Thread starter
- #1
I’ve searched at length and can’t seem to find a definitive answer. I want to run 37x13.5 tires on my stock SAS wheels. Is it possible to do that with just a suspension lift and no spacers without rub?
Sponsored
What size do you think. Probably 1 1/4”?You will most likely need wheel spacers.
Thanks for that info. I don’t like running spacers so I’m trying to do it without. As of right now the tires I’m going to get are the NOTTO Ridge Grapplers 37x13.5r17. I may just get them and the his max tire clearance kit and see how it runs with the Eibach 2.0 kit and if I need spacers I’ll add them. I really like the stock wheels and want to keep mine. I powder coated them to match the color scheme I have going on.I run 1.25 with mine but my 37” kenda klever’s are cookie cutters they aren’t as wide as most 12.5 tires. Here’s a bunch of links that will help so you know for sure, I just searched.
https://www.bronco6g.com/forum/threads/the-ultimate-37s-38s-tread.65684/
https://www.bronco6g.com/forum/thre...badlands-2in-lift-build-thread-round-2.48983/
Eibachs will provide enough lift to fit those tires. Hard to say, I’m 50/50 if you will need spacers or not on 13.5s without fitting them up first. I think you have a good plan tho.Thanks for that info. I don’t like running spacers so I’m trying to do it without. As of right now the tires I’m going to get are the NOTTO Ridge Grapplers 37x13.5r17. I may just get them and the his max tire clearance kit and see how it runs with the Eibach 2.0 kit and if I need spacers I’ll add them. I really like the stock wheels and want to keep mine. I powder coated them to match the color scheme I have going on.
I really hope that’s not the case. I’ll see after I add the JKS and tires. One guy said he was running 37x14.5 on stock SAS with no spacer but I’m not sure of what set up he has.I think ya will need at least 3/4” spacers…I’m running 37x13.50r17 MT Baja Legend MTs on Zero offset wheels with a 3” zone lift and JKS kit and things are pretty tight…