NEW Eibach Pro-Lift-Kit Performance Springs for Bronco Raptor NOW AVAILABLE!

Hey all!

Eibach just released their all new Pro-Lift-Kit Performance Lift and Leveling Springs for the 2022 and up Ford Bronco Raptor!




Eibach has released 4 different kits depending on how you want to customize your truck, whether it's just a simple front leveling or an entire lift all the way around, all while utilizing the stock FOX Shocks, Eibach has a configuration for just about anyone. (Unless your looking for CRAZY lift)

The Eibach springs allow for full range of suspension travel without additional stress on bushings and ball-joints and has proven so with hundreds of hours and thousands of cycles in development tests over the past year.

The full Pro Lift Kit will give your truck a 2.6" Lift in the front and 1.1" in the rear, providing not only a nice lift but a bit of a leveling from the stock ride height. Check it out here!

The Front Leveling Springs will do as expected and properly level the front end of the BRaptor about 1" to match the slightly higher stock rear ride height. Check them out here!

They also have both front and rear springs from the Pro Lift Kit available as individual sets, incase you're going something custom.

• Manufactured using race winning off-road race spring technology
• Developed to provide balanced ride quality, control, and off-road capability
• Finished in Heavy-duty corrosion resistant silver coating
• Compatible with factory FOX Hoss 4.0 shocks
• Made in USA
• Limited Lifetime Warranty

Check out ALL of the various kits here!
https://www.lethalperformance.com/s...o-raptor/suspension/springs?manufacturer=1016


As always, if you have any questions or need some help with Eibach products, reach out with anyone of us here at Lethal Performance!

Is it possible to customize spring rates for winch and bumper mods?

Any thoughts of replacement springs for the HOSS 3 Fox 2.5's? I currently have perch collars but would rather have just springs that give me a 2 1/2-in lift all around.

@LethalPerformance - Any testing been done to confirm if these would allow 40s with no rub?

c-dubb said:

@LethalPerformance - Any testing been done to confirm if these would allow 40s with no rub?

Click to expand...

Great question.

Do you have these on a stock BRaptor to see the proportions with the stock fenders?

LX2Brap said:

Is it possible to customize spring rates for winch and bumper mods?

Click to expand...

While these specific kits are not available in custom spring rates, Eibach does have the ability to order custom springs. However, that would have to be done directly through them.

3People1Body said:

Any thoughts of replacement springs for the HOSS 3 Fox 2.5's? I currently have perch collars but would rather have just springs that give me a 2 1/2-in lift all around.

Click to expand...

Unfortunately Eibach, or any other company to our knowledge, has yet to release a HOSS 3.0 specific spring. Eibach was working towards producing one, but still hasn't released any new information or updates concerning the kit.

c-dubb said:

@LethalPerformance - Any testing been done to confirm if these would allow 40s with no rub?

Click to expand...

Unfortunately, Eibach did not release any data as far as tire/wheel clearance gain is concerned... Although as these kits get delivered, we're hoping to see some impressive clearance and very possibly 40's without rubbing. We'll be sure to update as the info becomes available!

3People1Body said:

Any thoughts of replacement springs for the HOSS 3 Fox 2.5's? I currently have perch collars but would rather have just springs that give me a 2 1/2-in lift all around.

Click to expand...

LethalPerformance said:

Unfortunately Eibach, or any other company to our knowledge, has yet to release a HOSS 3.0 specific spring. Eibach was working towards producing one, but still hasn't released any new information or updates concerning the kit.

Click to expand...

Actually Eibach has these springs available for the HOSS 3.0. They are actually the same springs for the sasquatch/Bilstein shocks, but just yield different lift numbers. There are a few broncos on this forum running them as well as a few threads about the springs.

https://eibach.com/product/E30-35-056-01-22

IwannaGOfast said:

Actually Eibach has these springs available for the HOSS 3.0. They are actually the same springs for the sasquatch/Bilstein shocks, but just yield different lift numbers. There are a few broncos on this forum running them as well as a few threads about the springs.

https://eibach.com/product/E30-35-056-01-22

Click to expand...

Wow! We did not know that. Thank you for the information. We will update our website accordingly.

LX2Brap said:

Is it possible to customize spring rates for winch and bumper mods?

Click to expand...

I would bet so. Eibach is usually good about this. I bought stiffer springs from them to use on my RadFlos to prevent squatting of the rear of my 2021 Badlands. The new springs were a tad over $100, so not a huge expense.

c-dubb said:

@LethalPerformance - Any testing been done to confirm if these would allow 40s with no rub?

Click to expand...

well having 3” perch lift on my 40’s
And removing mudflaps ets

and still rubbing at 90% ish articulation….

I doubt that 1.1” rear is gonna get it done

I wish they made it 3.5 front 3.5 rear
I could care less about “level”
Just making it high as “possible” for off road, within reason of course for just springs

Has anyone tested these out? Interested but wondering about ride quality and real lift height.

Secondary question, are new UCA’s required with this lift? @LethalPerformance

derichio02 said:

Has anyone tested these out? Interested but wondering about ride quality and real lift height.

Secondary question, are new UCA’s required with this lift? @LethalPerformance

Click to expand...

We've had customers install these [we opted for coilovers] and have said it provided a balance between ride quality and a lift.

UCA's aren't required, but we recommend them with any lift, whether spring or coilover based.