Airing Up with ARB Twin Compressor and 4-Way Tube System

[evilletruck]

@evilletruck What's on your Bronco since you busted it? Do you have it back on the road again?

Yeah everything is back to operational. Muddigger offroad is doing a solid axle swap , and took their front dif out, I was able to grab it from them and swapped it out with the broken one and and busted CV axle and good to go again.

Sponsored

 

[Cysquatch]

This is the nicest way, but for those that want a cheaper (and even faster compressor), the portable maxitrac from napa with coupon is $94 and can outflow the arb twin.

Now it gets hot, has no warranty, and draws up to 90 amps but at 1/6th the cost this is my solution. The 4 way hose is a must. I go from 20 psi to 40psi on stock squatches in 4 minutes for all four. It takes longer to roll everything up.

Damn. Out of stock.

 

[Triceratops]

I

good luck finding a Napa that has one in stock.. and price is now up closer to $130. I went to the local Napa distribution center and they were able to find a store somewhere on the East coast that had a few in stock, but it was going to be $50 for shipping, so close to $200 altogether I passed... I'm hoping they get more in stock soon.

I just ordered the Morrflate air line system - it was $200 .. seemed worth it to spend the extra $100 and buy it completely done than spend $100 and have to assemble it myself

Picked mine up in December. And spent about $60-$70 building my own 4 way.

 

[lakesinai]

The ARB twin compressor aired me up from 15 to 36 psi in about 10 mins. Twice as fast as my old ViAir 440. This 4-way system is also what I use to air down

Id like to know the particulars of how you mounted the twin in that location? Bracket? Move anything? Is it in the way?

 

[MUDLVR]

Id like to know the particulars of how you mounted the twin in that location? Bracket? Move anything? Is it in the way?

Super easy to install and nothing is in the way. I bought the KR Off-Road mount from @4x4TruckLEDs.com

 

[ZipZit]

I'm considering building that hose spider in preparation for the arrival of my Bronco (heck, I have PLENTY of Time.... Badlands, Sasquatch, V6, Hardtop, Trailer tow... Nov 2020 reservation. Perhaps Mid 2023? Ugh. )

I'm really impressed with the three clip Haltec H-5265 tire valve coupler. Reference OffRoadPassport.com. Amazon Link

What I don't know... Will this coupler fit on the the Sasquatch wheel valve stem?

 

[4x4TruckLEDs.com]

Id like to know the particulars of how you mounted the twin in that location? Bracket? Move anything? Is it in the way?

That's our KR Off-Road Compressor Engine Bay Mount (Patent Pending) which is available here:

https://www.4x4truckleds.com/kr-off-road-arb-compressor-engine-bay-mount-for-2021-ford-bronco/

Add on a compressor and use coupon code BRONCO6G and we'll knock 10% off the purchase

 

[USAGUY]

good luck finding a Napa that has one in stock.. and price is now up closer to $130. I went to the local Napa distribution center and they were able to find a store somewhere on the East coast that had a few in stock, but it was going to be $50 for shipping, so close to $200 altogether I passed... I'm hoping they get more in stock soon.

I just ordered the Morrflate air line system - it was $200 .. seemed worth it to spend the extra $100 and buy it completely done than spend $100 and have to assemble it myself

I’ve been looking for the Napa Max for just a couple days. I must have called over a dozen Napas Yesterday. I actually got lucky and found one in Middletown NY that had 1 in stock. I picked it up this morning. I paid $127. looking forward to using it, fingers crossed.

 

[UncleBuck]

I saw another post similar to this and looked into the DIY. Parts were near $150 so I went with MORRFlate. Has done me right so far.

I priced out the parts and tools (I don't have the hose clamping tool) and it was near the same cost of the MORRflate so I just bought that instead.

 

[UncleBuck]

This is the nicest way, but for those that want a cheaper (and even faster compressor), the portable maxitrac from napa with coupon is $94 and can outflow the arb twin.

Now it gets hot, has no warranty, and draws up to 90 amps but at 1/6th the cost this is my solution. The 4 way hose is a must. I go from 20 psi to 40psi on stock squatches in 4 minutes for all four. It takes longer to roll everything up.

I picked up a Maxitrac a few months ago and I can air all my tires from 15 to 40 PSI in around 4 minutes with my MORRflate.

 

[Cysquatch]

I also went with the MORRFlate system. Used this coupon code for 15% off: YOTALANDR15

$200 with tax and free shipping.

 

[lakesinai]

That's our KR Off-Road Compressor Engine Bay Mount (Patent Pending) which is available here:

https://www.4x4truckleds.com/kr-off-road-arb-compressor-engine-bay-mount-for-2021-ford-bronco/

Add on a compressor and use coupon code BRONCO6G and we'll knock 10% off the purchase

Ok! You're on, i bought the bracket, single pump $ hose! Thanks for 10%. Is a wiring harness needed or available or is it with the pump

 

[4x4TruckLEDs.com]

Ok! You're on, i bought the bracket, single pump $ hose! Thanks for 10%. Is a wiring harness needed or available or is it with the pump

For the singles you need to kind of do it yourself. They DO provide the relay but it's not a bad idea to have some wire and connectors on hand. The twin is much easier (as it's 1 wire you tap into to the upfitters). The single has a relay you have to wire up yourself

 

[ssolypop]

The ARB twin compressor aired me up from 15 to 36 psi in about 10 mins. Twice as fast as my old ViAir 440. This 4-way system is also what I use to air down

I'm way more impressed with your wheel / tire package TBH

 

[bwbwinters39]

The ARB twin compressor aired me up from 15 to 36 psi in about 10 mins. Twice as fast as my old ViAir 440. This 4-way system is also what I use to air down

What lengths did you cut the hose to in order to reach all the tires?

Sponsored