if you take the emblem off and grind off or drill the plastic rivets on the back, the emblem will come apart and each individual piece can be painted any color and reassembled. It’s a little extra work but it will have the best results
Sponsored
Thanks, good to know! I'll circle back to this at some point, the chrome ring bugs me but looks good for now.
if you take the emblem off and grind off or drill the plastic rivets on the back, the emblem will come apart and each individual piece can be painted any color and reassembled. It’s a little extra work but it will have the best results
Nice work! I think I’ll give that a shot.I figured out how to get the upfitter Aux 5 and 6 always on!! Do at your own risk, this is my own experiment. It was way easier to wire than expected. I found this Yellow Green all over for constant power, one leading to the overhead console.
Then I found Aux switches E and F (5 and 6) were on a separate line than 1-4.
This was bugging me this evening after staring at the diagrams, went back to the garage, pulled the console back open, cut the green wire to pin 1, confirmed Yellow Green had power, jumped them, BAM, switches 5 and 6 work without turning on the Bronco.
View attachment 326171
View attachment 326172
I'll post this little bit of info on it's own thread, super excited that it worked. I plan to wire my dashcam and my MXT275 to these switches, that will allow me to turn off the 24/7 security recording on the cameras (3) and to use the GMRS radio without having to start the Bronco.
Well dang, the power I tapped into eventually turns off. Going to pull from another source, luckily I ran extra wires up there just in case.Nice work! I think I’ll give that a shot.
I’m curious does your amber light stay on when the truck is off (and the switch is still on)?
Yes, the amber light does stay on when the truck is off and switches are on. Not really what I want for the dashcam but it is what I want for the GMRS radio.Nice work! I think I’ll give that a shot.
I’m curious does your amber light stay on when the truck is off (and the switch is still on)?
Thanks! Been a lot of work, ready to take a break and enjoy it.Looks Good. Damn you have been busy. Im just chipping away at mods on mine. LOL