Thanks for the recommendation and links.Some install comments after installing the Mabett front flaps.
- I used stainless bolts and clips from Amazon.
- The bolts that go into clips on the fenders should be 20mm instead of 16mm long. A couple were hard to get started. It would be easier if they were longer
- Mabett should provide a new longer push pin for the in-board hole or maybe a screw. It is very hard to get engagement when you add the flap thickness.
Clip and bolt info:
https://www.amazon.com/dp/B0B529J9H4?psc=1&ref=ppx_yo2ov_dt_b_product_details
https://www.amazon.com/dp/B07PT62TCS?psc=1&ref=ppx_yo2ov_dt_b_product_details
How did you make them?Made an extension for the Mabett flaps. Now protects a little farther back. The BD General tires are also rock throwers.
yes I would get those 20mm screws.Thanks for the recommendation and links.
Are you suggesting we go with the 20mm screws instead? Like these: https://www.amazon.com/dp/B07PN256NG?ref=ppx_yo2ov_dt_b_product_details&th=1
I had some old universal Rally Armor mud flaps and just started cutting. Cut everything with a tin snips. Attached using plastic screws and nuts.
How did you make them?
will the 30% off work if you order only the fronts? I tried to order on Amazon but didn't work. Thank you30% Discount Code: https://www.amazon.com/gp/mpc/A1PUIMJ7EJ76LB
Note: Please use a computer to open this URL
If you have successfully installed Mud Flaps, you can participate in this giveaway!
PRODUCT DESCRIPTION
【Custom Molded】Fit full-size BRONCO, Fit All trim levels, Fit Sasquatch set, Accommodates factory rock rails or tube steps (If you have 35"s aftermarket wheels and no lift they will rub in some cases)- 【Protect Your Vehicle】Protect fender and rocker panel from stone chips, slush, dirt and debris.
- 【Prevent Accidental Sputtering】Protect your ride and those around you from the rage of the road.
- 【Durable Material】Durable, impact resistant all-weather thermoplastic material
- 【Buy with Confidence】It's free to return items if for any other reason you are not happy with your decision to purchase mabett mud flaps
I would recommend watching the installation video, as the instructions contained in it have some problems
30% Discount Code: https://www.amazon.com/gp/mpc/A1PUIMJ7EJ76LB
Note: Please use a computer to open this URL
If you have successfully installed Mud Flaps, you can participate in this giveaway!
PRODUCT DESCRIPTION
【Custom Molded】Fit full-size BRONCO, Fit All trim levels, Fit Sasquatch set, Accommodates factory rock rails or tube steps (If you have 35"s aftermarket wheels and no lift they will rub in some cases)- 【Protect Your Vehicle】Protect fender and rocker panel from stone chips, slush, dirt and debris.
- 【Prevent Accidental Sputtering】Protect your ride and those around you from the rage of the road.
- 【Durable Material】Durable, impact resistant all-weather thermoplastic material
- 【Buy with Confidence】It's free to return items if for any other reason you are not happy with your decision to purchase mabett mud flaps
I would recommend watching the installation video, as the instructions contained in it have some problems
I did the same thing--$199.99 either way.I don't see a discount code. I searched for the same thing directly from Amazon and it was the same price with or without the link provided!
When I did it, the discount did not show up until you checkout. The last screen before you submit order. It doesn't show in the cart.I don't see a discount code. I searched for the same thing directly from Amazon and it was the same price with or without the link provided!