- Joined
- May 29, 2019
- Threads
- 18
- Messages
- 4,274
- Reaction score
- 14,061
- Location
- Hunterdon County, NJ
- Vehicle(s)
- '84 Bronco, '93 Bronco, '94 Bronco, 2012 Mustang
- Your Bronco Model
- Big Bend
- Banned
- #16
Sponsored
Other people googling for me is even easier ?
Hold up. Let me start out by saying I'm a turbo Dummy... But.. Am I correct in thinking these goat modes basically change settings for the engine? Like fuel mixture? Stuff like that to gain hp or gain torque?Q:Where can I get a wire harness and computer for this engine?
Asked by DEREK on September 06, 2020
A:
Hello Derek, Ford Performance will be offering one later the year.
Ford Performance Parts Answer - September 09, 2020
Answer This Question
Q:What bolt pattern is the bell housing and Will there be a controller for a manual transmission models?
Asked by AARON on August 25, 2020
A:
Hello Aaron, this engine will use the same bolt pattern as a 5.0 Coyote, 4.6/5.4. A controls pack is slated for later this year from Ford Performance.
Ford Performance Parts Answer - August 28, 2020
....... see this "controls pack" will run the engine but to get that and the drivetrain ECM to work together, so you retain goat modes, trail control, etc. this might be a little tricky use you have an insider in Ford to help you out. I'm sure it can be done with a couple of laptops and the right passwords.
There's a lot of communication between ECU and TCU for shift points, torque overload protection, traction control, and you guessed it, emissions.Hold up. Let me start out by saying I'm a turbo Dummy... But.. Am I correct in thinking these goat modes basically change settings for the engine? Like fuel mixture? Stuff like that to gain hp or gain torque?
If that is the case, 700+ hp and what was it 500+ lb/ft torque? So would we even care about G.O.A.T. modes?
Don't go soft on us @BAUS67 , keep the movement alive!
Q:Where can I get a wire harness and computer for this engine?
Asked by DEREK on September 06, 2020
A:
Hello Derek, Ford Performance will be offering one later the year.
Ford Performance Parts Answer - September 09, 2020
Answer This Question
Q:What bolt pattern is the bell housing and Will there be a controller for a manual transmission models?
Asked by AARON on August 25, 2020
A:
Hello Aaron, this engine will use the same bolt pattern as a 5.0 Coyote, 4.6/5.4. A controls pack is slated for later this year from Ford Performance.
Ford Performance Parts Answer - August 28, 2020
....... see this "controls pack" will run the engine but to get that and the drivetrain ECM to work together, so you retain goat modes, trail control, etc. this might be a little tricky use you have an insider in Ford to help you out. I'm sure it can be done with a couple of laptops and the right passwords.
Hey, both you Debby Downers wanna give it a break? F emissions, F traction control, is torque overload even a thing? We can never have enough torque!There's a lot of communication between ECU and TCU for shift points, torque overload protection, traction control, and you guessed it, emissions.
Hold up. Let me start out by saying I'm a turbo Dummy... But.. Am I correct in thinking these goat modes basically change settings for the engine? Like fuel mixture? Stuff like that to gain hp or gain torque?
If that is the case, 700+ hp and what was it 500+ lb/ft torque? So would we even care about G.O.A.T. modes?
Don't go soft on us @BAUS67 , keep the movement alive!
I wish they'd bring back Headbangers Ball, 80's style, back to TV!for the record @EvlNvrDys I'm watching Metal Mayhem on MTV Classic while I'm surfing here. Don't play much of the heavy stuff but at least it's something.to listen to. ??
Has no one on here ever driven a FSB with a 351 under the hood? You know when 12 MPG was a good day. Sure we had 35 gallon tanks back then, but you know... Technology. They'll squeeze a few more gallons into the tank ?I’m guessing one of these in a Bronco would require a back seat delete to account additional gas tank space Lol
Hey, both you Debby Downers wanna give it a break? F emissions, F traction control, is torque overload even a thing? We can never have enough torque!
Now take a deep breath and say it with me "V8's are for real men, only little boys drive turbos!"?
Edit. Hey @JAGSarge
Haha sorry. My occasional side gig involves federalizing cars so I have to think about those sorts of things. I forget that nobody actually cares if the car was actually built and sold here originally ?Hey, both you Debby Downers wanna give it a break? F emissions, F traction control, is torque overload even a thing? We can never have enough torque!
Now take a deep breath and say it with me "V8's are for real men, only little boys drive turbos!"?
Edit. Hey @JAGSarge
Haha sorry. My occasional side gig involves federalizing cars so I have to think about those sorts of things. I forget that nobody actually cares if the car was actually built and sold here originally ?
Wait what? KIX? Oh God No! Tell me when some RJD, Overkill, Testament, Maiden.. Slayer... Real music comes on ?I know you are not a turbo guy but in the video towards the end you will here him say with the Whipple on there Wolfe thinks it will be in the 1500-1600 HP. Whipple is a supercharger and it works just like a turbo it makes you engine think it's bigger. They compress the air and force more in. "AIR" is 1 bar. if you put 1 bar of boost in the motor you will, in theory, double the horsepower, 2 bar and you triple it. Before everyone chimes in this is just in theory to help you understand, there are many others factors that complicate things but that is the "nuts and bolts" of it.
Hence the 'ZILLA in the video makes 800 ponies so if you put 15 psi( 1 bar) to it it will be in the 1600 range as Mr. Wolfe stated.
one my favorites........ KIX .............. BODY TALK ............. now playing
Can’t speak to the Bronco but on my challenger power isn’t directly affected. Basically track is a higher shift point, full open exhaust and removes all traction control but keeps stability control. Sport is a slightly less version of track with stability and traction control. Eco is stability and traction, lower revs and cylinder deactivation.Hold up. Let me start out by saying I'm a turbo Dummy... But.. Am I correct in thinking these goat modes basically change settings for the engine? Like fuel mixture? Stuff like that to gain hp or gain torque?
If that is the case, 700+ hp and what was it 500+ lb/ft torque? So would we even care about G.O.A.T. modes?
Don't go soft on us @BAUS67 , keep the movement alive!