For those interested with similar issues, I fixed my problems. I pulled down the Mabett light (which in my opinion was just as difficult as Removing the OEM light). I added 4 thicker and wider strips of double-sided 3M tape. I also gave it hell to get my wire harness connector seated / “clicked” in all the way. I found my Mabett wire connector had just a tad too much plastic so had to really leverage it in with a screw driver as opposed to just a push & click. But finally got it to click in. Then I pushed it back up in the hole and it secured in very nicely now with the clips and 3M tape. Very secure now and I can finally say I’m happy with it. Just a bit more QC with Mabett on this one and it would have been flawless and saved me a boatload of time.I installed mine today and ran into a couple problems. @Mabett can you help?
1.) Wire harness connector doesn’t clip in. It pushes in pretty snug, but doesn’t “click” like the OEM one.
2.) Mine is very loose. It’s only held in by the two metal clips. The provided sticky tape isn’t thick enough to adhere to the roll bar trim. It looks fine, but as soon as you touch it it’s pretty loose and will likely rattle off-road. I’m afraid if I pull it back down to add my own thicker sticky tape, it will likely break or bend the clips just like when removing the OEM light.
Anyone else with these issues and how did you resolve? Thank you.
I can resend you oneI installed mine today and ran into a couple problems. @Mabett can you help?
1.) Wire harness connector doesn’t clip in. It pushes in pretty snug, but doesn’t “click” like the OEM one.
2.) Mine is very loose. It’s only held in by the two metal clips. The provided sticky tape isn’t thick enough to adhere to the roll bar trim. It looks fine, but as soon as you touch it it’s pretty loose and will likely rattle off-road. I’m afraid if I pull it back down to add my own thicker sticky tape, it will likely break or bend the clips just like when removing the OEM light.
Anyone else with these issues and how did you resolve? Thank you.
You can replace the tape, and if you paid for the tape, you can ask me for reimbursementI too have issues with the tape, not thick enough to stick to trim. I had to wedge a bit of double sided tape at back to help secure. Don't know how it will hold up long term. I did not have an issue with th harness clip.
Thank you, but all good now. I just pulled the light down and added my own thicker tape. I also was able to wrestle with the wire harness connector and finally able to get it to click in, but had to use a screwdriver for leverage.I can resend you one
Is there still a promo code for this? They look great!Shipped this week, expected to arrive at FBA in 15 days
Don't mean to be dumb but what is FBA? Also will you please provide a link to the sight where we can purchase them? ThanksShipped this week, expected to arrive at FBA in 15 days
Fulfillment by Amazon. The seller ships their inventory to Amazon to then ship out to fulfill orders.Don't mean to be dumb but what is FBA? Also will you please provide a link to the sight where we can purchase them? Thanks