ICONIC SILVER Bronco Club

[L&Ebronco]

Looks pretty kick ass. Thanks for sending I really appreciate it! Looks like you also have a soft top too. Is it factory? Thanks


[lQUOTE="L&Ebronco, post: 1892990, member: 22554"]
21 badlands. Almost 38k miles and loving everyday in it.

What wheels are you running? They look nice
[/QUOTE]
Thanks. Yes it’s factory softtop. Wheels are kmc carnage.

Sponsored

 

[BodhiMac]

Top off

 

[Autoenthusiast2]

 

[Drose017]

Finally done with the truck. ‘23 wildtrak with diode dynamics lighting, kmc 17” wheels, BFG 37s, RPG perch and UCAs, JCR prerunner bar and go rhino side steps.

 

[TCB-1]

New wheels. This color is great.

This is look is the exact reason I ordered an Iconic 2dr! Heck, I even decided on the same rims before I saw this pic! Perfect. Hope to be in the I.S. club in the future.

 

[OJK]

Finally done with the truck. ‘23 wildtrak with diode dynamics lighting, kmc 17” wheels, BFG 37s, RPG perch and UCAs, JCR prerunner bar and go rhino side steps.

It looks like the Go Rhino running boards hide the pinch weld fairly well or am I mistaken?
Nice looking ride

 

[Drose017]

It looks like the Go Rhino running boards hide the pinch weld fairly well or am I mistaken?
Nice looking ride

Yes and no: they slope down from front to back (I loosened and retightened the bolts 2 times to see if it was me). So they cover the welds completely in front but the back 25%.they Do not cover.

 

[OJK]

Yes and no: they slope down from front to back (I loosened and retightened the bolts 2 times to see if it was me). So they cover the welds completely in front but the back 25%.they Do not cover.

Apparently Go Rhino is redesigning the brackets due to the sloping issue many have experienced. You should contact them to see if you can get a replacement set. See this forum thread:

https://www.bronco6g.com/forum/threads/go-rhino-rb30’s-installed.68251/page-2

 

[j_4260]

Hit the trails this past weekend with the guys.

 

[Ford Motor Company]

Hit the trails this past weekend with the guys.

Looks like the perfect way to spend the weekend! Thanks for sharing these photos of your Bronco, Jonathan!

 

[soldier989]

Almost a month old. My base model MT with 1300 miles now on the clock. Full body PPF, grill converted to the Heritage style, some tint and rails. I really enjoy this car, noisey trans and all.

 

[zuppy51]

Just got back from a 2,500 mile trip from Cal to Utah, through Death Valley, Zion, Bryce, Kodachrome and around through Dixie National Forest. Car performed flawlessly. We did do some easy trails and went through to an abandoned mine. Driving off-road in this vehicle is a blast.

 

[Ed Morris]

I've had mine for just over a week now. Only fairly subtle customizations so far, including replacing the fender badges with a small mountain graphic and some pinstripes.

 

[soldier989]

Plastidipped my pinch welds today. Came out OK. I should have hit it with a razor before pulling the tape, lesson learned, this was my 1st time ever using the stuff.

 

[soldier989]

Yes and no: they slope down from front to back (I loosened and retightened the bolts 2 times to see if it was me). So they cover the welds completely in front but the back 25%.they Do not cover.

My "factory" looking aftermarkets do the same, but yours are more noticeable since the pinch makes it more obvious. Add some washers or a piece of plastic as spacers and raise it up. (Now that I just thought of this, I'll be doing the same)

Sponsored