NEW PRODUCT! APEX Designs Compact Air Reel System Mount by Fast Intentions

[Fast Intentions Inc.]

Fast Intentions has released a mount to install an Apex Designs compact air reel in the 6G Bronco (4-Door) / Bronco Raptor with hard top & soft top roof.

Our mount affixes to the driver side roll bar in factory mounting location. The mount is "direct fit" without cutting, drilling, or welding to install, as we use the thread boss that is pre-installed in most Bronco roll bars. We recommend that you confirm that your Bronco has the factory threaded Nutserts on your roll bar prior to ordering. We have designed our mount to fit with the Bronco Raptor rear roll bar cross brace, as well as the Diabolical Inc. slipstream security enclosure.

Bronco Apex Air Reel Mount by Fast Intentions : In-Stock & Ready to Ship

• CNC Laser Cut from 11ga 304 Stainless Steel.
• CNC formed specifically for 6G Bronco.
• Fits Bronco 4 Door and Bronco Raptor.
• Fits with Diabolical Inc. Slipsteam Security Enclosure.
• No cutting or drilling required for installation.
• Includes M8 mounting hardware.
• NOT compatible on Bronco 2 Door.
• Apex Designs Compact Air Reel System is sold separately.

For those who already have an under the hood mounted compressor, we are working on a "pass through" bulkhead to get through the firewall along with an airline kit to run your on-board air system to the Apex air reel at the rear of your Bronco. Stay tuned for more details!

UPDATE: 10/22/2024
Good news! We have confirmed fit of our Apex Air Reel Mount with the 4-door soft top roof.

The linkage for the soft top is very close to the Apex low profile banjo fitting, however you can still hinge the top to allow access into the trunk space.

Warning: You will not be able to fold the soft top all the way down to "convertible mode" as the linkage will hit the air fitting.

Sponsored

 

[Honkman]

Definitely interested when you get the ‘pass through’ rolling. I already have mine mounted under the hood, but I love that air reel. Nice work!

 

[Bigmoose]

Any plans for a passenger side mount? My power tank is on that side.

 

[Bikeric]

2-door Bronco owners that go off-road, air down, and want something like your product:

 

[ElDuderino]

Fast Intentions has released a mount to install an Apex Designs compact air reel in the 6G Bronco (4-Door) / Bronco Raptor.

Our mount affixes to the driver side roll bar in factory mounting location. The mount is "direct fit" without cutting, drilling, or welding to install, as we use the thread boss that is pre-installed in your Bronco roll bars. We have confirmed fit with the Bronco Raptor rear cross brace, as well as the Diabolical Inc. slipstream security enclosure.

Bronco Apex Air Reel Mount by Fast Intentions : In-Stock & Ready to Ship

• CNC Laser Cut from 11ga 304 Stainless Steel.
• CNC formed specifically for 6G Bronco.
• Fits Bronco 4 Door and Bronco Raptor.
• Fits with Diabolical Inc. Slipsteam Security Enclosure.
• No cutting or drilling required for installation.
• Includes M8 mounting hardware.
• NOT compatible on Bronco 2 Door.
• Apex Designs Compact Air Reel System is NOT included.

For those who already have an under the hood mounted compressor, we are working on a "pass through" bulkhead to get through the firewall along with an airline kit to run your on-board air system to the Apex air reel at the rear of your Bronco. Stay tuned for more details!

Are there any plans to make this for the 2 door at all?

 

[Hellish]

Feeling like a bastid stepchild in my 2 door...

 

[TNcoupe]

Feeling like a bastid stepchild in my 2 door...

We have been since June 13, 2020.

 

[Spyder625]

will there be a bracket made for the raptor as the back is different from the stiffening bar to mount that reel? Great work

 

[vrtical]

will there be a bracket made for the raptor as the back is different from the stiffening bar to mount that reel? Great work

this will work, uses the existing mounting holes and its below the C brace.

 

[SunilD]

I've been wanting this reel, a mount for the 2 door or a molle panel would be

 

[Spyder625]

this will work, uses the existing mounting holes and its below the C brace.

thanks for info

 

[Noremac]

Careful, not all broncos have the nutserts on the rollbars.

 

[Fast Intentions Inc.]

2-door Bronco owners that go off-road, air down, and want something like your product:

Are there any plans to make this for the 2 door at all?

Feeling like a bastid stepchild in my 2 door...

We have been since June 13, 2020.

I've been wanting this reel, a mount for the 2 door or a molle panel would be

Don't worry, we haven't forgotten about the 2-door crowd. We are examining design options for the 2-door Bronco now and we are hoping to have an option for you soon.

It would be great if we could get a preliminary list of 2-door Bronco customers that would be interested in something like this. This will help us gauge interest in the product and account for initial production run quantities.

 

[Fast Intentions Inc.]

Definitely interested when you get the ‘pass through’ rolling. I already have mine mounted under the hood, but I love that air reel. Nice work!

Thanks! Stay tuned!

Any plans for a passenger side mount? My power tank is on that side.

You might be onto something here. We will have to look at this.

will there be a bracket made for the raptor as the back is different from the stiffening bar to mount that reel? Great work

Yes, our mount is confirmed to fit with the Raptor rear stiffening bar. Our air reel mount will fit without removal of your stiffening cross bar.

Careful, not all broncos have the nutserts on the rollbars.

Appreciate you mentioning this important detail. Some of the early model Broncos did not come with the Nutserts pre-installed from Ford. We recommend that you confirm that your Bronco has the factory threaded Nutserts on roll bar prior to ordering.

 

[Spyder625]

Thanks! Stay tuned!



You might be onto something here. We will have to look at this.



Yes, our mount is confirmed to fit with the Raptor rear stiffening bar. Our air reel mount will fit without removal of your stiffening cross bar.



Appreciate you mentioning this important detail. Some of the early model Broncos did not come with the Nutserts pre-installed from Ford. We recommend that you confirm that your Bronco has the factory threaded Nutserts on roll bar prior to ordering.

thank you!

Sponsored