Sponsored
1979's latest activity
-
1979 replied to the thread Raptor Running Boards? Help!.Iām in MD. Cheapest Iāve seen these sold for is $400 so Iād sell for that. Looks like youāre in TN. Thatās a pretty far hike. Iāll be In... -
1979 replied to the thread Raptor Running Boards? Help!.You need the complete rail and step assembly. Iām looking to sell a set if youāre interested and willing to travel a bit for a decent...
-
1979 reacted to zathus's post in the thread No covers for my cheap China light bar? No problem! with
Like.
So I'm not one of those people that dumps a bunch of money in the lights. Like I'll put them in but I put in the cheap stuff and put... -
1979 reacted to Skif2010's post in the thread ARB Brushless Compressor + Air Tank -- trunk mount install with Like.
Hi everyone, I just finished a project based on a brushless pump. I bought the bracket, receiver, and hose reel from a Chinese website...
-
1979 replied to the thread *Update June 13th Uwharrie Trip.Any idea when the July trip is going to be? Iām going to be traveling through there heading back to Maryland on Monday July 27th and...
-
1979 replied to the thread Bronco Sliding Glass Roof Revealed In Patent Filing.The one touch sky top really is the best. I wish Ford would just copy it already. I'd trade up immediately.
-
1979 replied to the thread Goosetuned R&D Tuning Thread - Bronco Raptor +300whp and 200wtq over stock!.What front bumper is this?
-
1979 replied to the thread Lethal Performance Memorial Day Sale Starts NOW ā 10% Off w/ Code REMEMBER.Not valid on MRT exhausts?
-
1979 reacted to RK Racing's post in the thread Please Help Explain My Orderā¦ā¦ Thanks! with Like.
Ford sent me another update this week stating dealer ETA is May 29 to June 4ā¦ā¦. So we will be driving the new Raptor home in...
-
1979 replied to the thread My Bronco Raptor Fire Total Loss Experience.It's great to hear that Ford took care of you. That's a scary situation. I'm glad everyone made it out unharmed.
-
1979 replied to the thread New Raptor Mic top inconsistencies.Make sure they order the headliner if you have that. It will not come with the clamshell and they will tell you it does. Then also make...
-
1979 replied to the thread Rear cargo area side window molle panel question.What happens when you take your hardtop off? Also, is it a pain to reach the bolts to remove the top?
-
1979 replied to the thread What Did You Do To Your Bronco Raptor Today? š§ š§° šŖ.Stickerfab fender vent vinyl. Been wanting to get these done for a while now. In person it matches the flares almost perfectly.
-
-
1979 replied to the thread New Jersey WTB Bronco Raptor Running Boards.Iām located in MD, just outside of Baltimore. I would sell my complete set if youāre in the area sometime soon. -
1979 replied to the thread What Did You Do To Your Bronco Raptor Today? š§ š§° šŖ.Stretched its legs and tested skid plates.
-
-
1979 replied to the thread THE BRONCO āwaveā??.No we didnāt
-
1979 reacted to Epiphany's post in the thread What Did You Do To Your Bronco Raptor Today? š§ š§° šŖ with Like.
Took my rear differential housing skid off, and drained the fluid out. The cover I cleaned up and had powder coated months ago can...
-
Dry Carbon Ford Bronco Raptor fender vents - located in Central MO. Could ship, would rather local. $1250 from Ford asking $850. On car...
-
1979 reacted to Y2KFirehawk's post in the thread PTYYDS Wireless Charger Pad with Built-in Dual Silent Fans with Like.
It does appear that way https://www.amazon.com/PTYYDS-Compatible-2021-2025-Replacement-Accessories/dp/B0G1M82LPJ
-
1979 replied to the thread PTYYDS Wireless Charger Pad with Built-in Dual Silent Fans.Will work to replace the existing wireless charger/phone heater?
-
1979 reacted to theblackangus's post in the thread My gratuitous and unneccessary on-board air setup with Like.
/sarcasm Bah this is all ridiculously un-refined... you have to hook hoses up to the tire and cant use this while moving? /sarcasm . . ...
-
1979 replied to the thread My gratuitous and unneccessary on-board air setup.Now that install would definitely take longer than 90 mins. š
-
1979 replied to the thread My gratuitous and unneccessary on-board air setup.How long should I say it took? At the end of the day, the main goal of this post is definitely to make sure swamp2 agrees with the time...
-
1979 replied to the thread My gratuitous and unneccessary on-board air setup.Running air lines and assembling the manifold took about 90 minutes and again, a large chunk of that time was spent just deciding what...
-
1979 reacted to 5GENIDN's post in the thread My gratuitous and unneccessary on-board air setup with Like.
Nice! I am in the middle of doing the same thing.... figured 4 short whips would be a lot easier to care for and store than a long...
-
1979 replied to the thread My gratuitous and unneccessary on-board air setup.Powertanks are cool. I have no interest having one taking up my cargo space. Speed was not a priority when choosing this setup. Getting...
-
1979 replied to the thread Crippled Bronco Raptor Build - by a Fabricator Shop.Not gonna lie, I dig the front bumper.
-
1979 reacted to GnormalGnome's post in the thread My gratuitous and unneccessary on-board air setup with Like.
Gratuitous? ā Unnecessary? ā Do I suddenly want to do something similar? You can bet your bottom dollar that I do! :LOL: Nice job...
-
1979 replied to the thread My gratuitous and unneccessary on-board air setup.This was the number one motivation for doing this. The long, heavy hose that gets muddy af and sucks to try to wrap up and store was too...
-
-
The setup includes a Schrader valve in each wheel well. I use a short, lightweight whip to connect the valve stem at each wheel. The...
-
-
I dig the wheels, That dish is deep!
-
1979 replied to the thread Looking for a minimalist KEY FOB? We may be in luck..Totally understandable. Reach out once itās ready for sale and I think Iāll purchase.
-
1979 reacted to Tye's post in the thread Thoughts on After Market Wheels for your Raptor? with Like.
-
1979 replied to the thread Looking for a minimalist KEY FOB? We may be in luck..Iād be interested. Even more interested if you want to share the STL.
-
1979 replied to the thread Three Wheel Thursday pics/videos. Open to any Bronco..A couple shots of my old Badlands 3 wheeling. Havenāt had the Raptor on 3 yet. -
-
1979 reacted to Deadpool392's post in the thread Three Wheel Thursday pics/videos. Open to any Bronco. with Like.
-
Iām planning on hitting Rausch Creek April 19 or 26th. Iāll be looking to do green and blue trails. Anybody care to join?
-
1979 reacted to hec1's post in the thread Is rubbing, trimming needed for 38x13.5x17, -12 offset? With 1.5 lift front and back with Like.
Just got these 38 x 12.50 x R17 Nitto Ridge Grapples 0 offset. Love em. Outside of the hypercos front and rear, no additional work...
-
1979 replied to the thread What Did You Do To Your Bronco Raptor Today? š§ š§° šŖ.Replaced the bucking Bronco with a bucking Pumbaa. I always liked the Warthog code-name better than Raptor.
-
-
1979 reacted to AJITO's post in the thread 2022 Bronco Wildtrak Build (Long Travel w/ 40" Tires) update with Like.
Just an update on the work APG completed back in Nov. Also added a IAG Air/Oil Separator that has somehow made the car faster! If you... -
1979 replied to the thread BRAPTOR AFTERMARKET SPARE TIRE RATTLES AGAINST BRAKE LIGHT.You probably just need to get longer bumpers. Something like this...
-
1979 replied to the thread Winch mount for 2024 Bronco Raptor?.Wish there was a rear winch set up. APG offered one for a while but itās not on their website any longer, they didnāt answer my emails...
-
1979 reacted to Kboyts's post in the thread Show me your 3D printed accessories. 3D Prints for Bronco Enthusiasts. with Like.
I printed the letter inlays. Vent tabs were ordered from amazon.
-
Would prefer to keep the bumper ends or trade the assembly for your blank bumper ends. These are full assemblies with SPV harnesses to...
-
-
Ford OEM Bull Bar as seen below. In great shape. Prefer pickup as shipping would be prohibitively expensive.
-
