FORScan Bronco Working Spreadsheet (double honk, sport mode, chimes, seatbelts, and more!)

[SierraBronco]

is there a ledger/key that tells you what the xx's mean. For fog lights, the first column is **XX, the second is XXXand the third column says xx--. what do columns 1, 2, and 3 represent and how do I decode this? Sorry if this is a repeat question. I am very new at this.

Leave those values alone. I would recommend recording what they are before changing anything. You can pull the as-built from Ford if the website is working but it's easier to simply have it all documented. That's in addition to your backup.

Sponsored

 

[SlowTrak]

Anyone able to get Nav in Motion without losing nav sound?

 

[Go_UL_Cards]

Make sure you back up all modules before you start making changes. The as-built from Ford will update with current changes overtime and no longer reflect the starting point.

 

[Deadpool392]

Has anyone figured out how to add stop and go to ACC on a ’25 yet? Everything I am seeing is earlier models and the values do not match my Bronco in the ABS configure.

 

[JLS_Wisconsin]

I haven’t been able to disable it in my 2025 either. Hoping someone has figured it out.

The chime is very annoying but so is the seatbelt graphic that shows up every time I started my 2025 Bronco or whenever I got out and back in.
So I researched Forscan and found something that works for my Bronco.
No guarantee it will work for you; ensure you take screenshots or pictures before and after your changes! Backup too!
I started with the well documented IPC As Built mod:
IPC 720-01-01 xxxx xx0x xx THEN Write All

That helps for the chime but not the driver display seatbelt graphic.
Easy way, for me, is to open the IPC Module configuration (NOT AS BUILT)
Refer to attached picture.
Then edit two parameters: (seen in my picture)
Belt Monitor Chime Enabled --> Disabled
Belt Monitor Chime Operator Enabled --> Disabled

THEN Edit (Not seen in my picture)
Seat Row 1 Bench --> Not Present
Seat Row 2 Bench --> Not Present

THEN Edit
Seatbelt Configuration to Fixed Seat present with Belt Minder (see pic)

THEN WRITE (do NOT forget to document your before & after changes!!!

Not sure if all these changes are required but it worked so I stopped.
NOTE: Bronco still chimes if seat belt is removed while driving (ok with me).
Hope this helps you and others.

 

[06tgraygt]

Couldn't find this info in the spreadsheet i may be overlooking it or misunderstanding the description. I'm getting ready to do the audio upgrade in my 25 Big Bend non b&o. Where is the change for the fake engine noise and the change to move chimes from the main speakers to the internal head unit speaker?

 

[Acewizard]

I made this for my 2023 Bronco. thought I would share.

 

[jdru66]

has anyone figured out the blocked settings on the 2025 and newer yet? I get a security error when attempting to make some adjustments

 

[ssitruc]

I don't know what the "blocked settings" are that you refer to, complete new here... But on my '25 Badlands I was able to do Global Windows, Bambi Mode, Triple Ding at Start Up, Panic Button to two presses, and added Sport Mode to the available GOAT modes, then got rid of the seatbelt dinging using the procedure in the owners manual. Used ForScan V2.3.69, and did not see any "security error", just the softwares normal "are you sure you want to do this" warnings. Thru the process(s) I did get some DTC codes, but after I was done, I cleared them and none has came back since.

If you are talking about the ones that haven't been figured out yet on the '25s (that I'm aware of), like disabling Auto Stop/Start, I didn't mess with that because I had already installed an Auto Stop/Stop Eliminator...

 

[jdru66]

I don't know what the "blocked settings" are that you refer to, complete new here... But on my '25 Badlands I was able to do Global Windows, Bambi Mode, Triple Ding at Start Up, Panic Button to two presses, and added Sport Mode to the available GOAT modes, then got rid of the seatbelt dinging using the procedure in the owners manual. Used ForScan V2.3.69, and did not see any "security error", just the softwares normal "are you sure you want to do this" warnings. Thru the process(s) I did get some DTC codes, but after I was done, I cleared them and none has came back since.

If you are talking about the ones that haven't been figured out yet on the '25s (that I'm aware of), like disabling Auto Stop/Start, I didn't mess with that because I had already installed an Auto Stop/Stop Eliminator...

the ones in th IPC I get a security error. I am wondering if it has to do with the Pro cal ford fine I had put on.

 

[RoverDude]

If you have a registered forscan account, there's a beta version (2.3.71.test20260218) in that will fix that. Or you can wait a few months and that should be part of full revision set.
That is associated with the 2025 Plus IPC module.

 

[jdru66]

If you have a registered forscan account, there's a beta version that will fix that. Or you can wait a few months for that to get released as part of full revision set.
That is associated with the 2025 Plus IPC module.

thanks that helps. I do not have a registered forscan account. it look like you cannot buy them on the site anymore either. I guess i will have to wait.

 

[Spamy]

Where is the change for the fake engine noise and the change to move chimes from the main speakers to the internal head unit speaker?

IPC Module - Primary Source - Change from Audio Speakers only to Instrument Cluster Only

 

[WildHorseJoe]

thanks that helps. I do not have a registered forscan account. it look like you cannot buy them on the site anymore either. I guess i will have to wait.

You can get a 2 month trial for free. After you sign up for it, leave that window open and refresh the screen about 30 minutes later. I just did this yesterday and it worked fine.

 

[jdru66]

You can get a 2 month trial for free. After you sign up for it, leave that window open and refresh the screen about 30 minutes later. I just did this yesterday and it worked fine.

that’s the free version. The paid version gets you past the blocks you tile the free one is updated.

Sponsored