Gorilla whip led whip light won’t work.

[Wolford678]

I recently purchase the gorilla whips led 4’ whip light. It came with the led whip light, mounting hardware, a remote control, and a huge wiring harness with extra cables. It is all 12v.

I want to power it from the pre wired aux switches that run through the vehicle. (I know how to do that.) But I don’t know how this wiring harness that came with it works. It was obviously designed for a side by side vehicle. I can’t seem to get power flowing to light up the led lights at all.

any advice would be awesome.

I have the plug and play wiring harness with a wireless controller.

Sponsored

 

[helifino16]

Good luck... That Harness looks suspiciously like this:

How can it be THAT hard to figure out - lol.

 

[HighVelocity]

Install the harness as instructed, connect the upfitter switch to power the relay on the harness (Pin 87).

 

[Wolford678]

Mine isn’t labeled. They sent me an instruction sheet. But I think I’m missing component like a controller. It would be nice if they would answer my email.

 

[Wolford678]

Ii have since ordered something called an alpha “controller” and also a switch. Hopefully this will solve the problem. Another $93 dollars later.

 

[Wolford678]

I’m retuning this Gorilla Whips garbage. Worst $200 I’ve ever spent. It simply doesn’t work. It won’t light up.

 

[TheKim]

I have a cheap $60 one from Amazon that has been pretty good so far.
I haven't messed with the Gorilla ones, that's unfortunate that they didn't work as expected.

https://www.amazon.com/dp/B0DFPV1Z9Y

Sponsored