How To - ARB Brushless Twin Compressor Install

[mikes781]

I’ve been extremely happy with it- their products are super high quality.

The only thing that’s even close to a bummer is that the hose gets dusty, but I’m in the habit now or just rinsing it off whenever I do my post crawl wash. No problem.

Convinced me to try the Apex reel. Going to get the parts ordered this weekend. My compressor was delivered today and am looking over the harness and the diagrams you marked up. Big help but have two questions. Should the green wire in the harness for the manifold be removed if I’m not using one? There’s two arrows that point to the black wire and I suspect one was meant for the green. Is the red wire that connects to the uplifted switch, the one that comes off the pressure switch?

Sponsored

 

[4x4TruckLEDs.com]

Convinced me to try the Apex reel. Going to get the parts ordered this weekend. My compressor was delivered today and am looking over the harness and the diagrams you marked up. Big help but have two questions. Should the green wire in the harness for the manifold be removed if I’m not using one? There’s two arrows that point to the black wire and I suspect one was meant for the green. Is the red wire that connects to the uplifted switch, the one that comes off the pressure switch?

if you ordered the kit from us just follow our provided instructions

 

[mikes781]

if you ordered the kit from us just follow our provided instructions

Thanks I did order from you and now see the wiring instructions. Thought they were just for the bracket. If I had read the whole thing I would have seen it sooner. They do mention connecting the uplifter to the red wire I was referring to.

 

[MileHighWT]

Convinced me to try the Apex reel. Going to get the parts ordered this weekend. My compressor was delivered today and am looking over the harness and the diagrams you marked up. Big help but have two questions. Should the green wire in the harness for the manifold be removed if I’m not using one? There’s two arrows that point to the black wire and I suspect one was meant for the green. Is the red wire that connects to the uplifted switch, the one that comes off the pressure switch?

You have it right- the green wire can be removed completely, the red wire from the pressure switch goes to the upfitter switch.

Sponsored