What did you do TO / WITH your Bronco today? 👨🏻‍🔧🧰🚿🛠

[Rhett]

Ran the Rimrocker Trail.

Sponsored

 

[Mean Green]

I installed 3/4 inch body lift. Filled the gap the old school way, with weatherstripping. Much more details in my build thread…

https://www.bronco6g.com/forum/threads/mean-green-build…-time-will-tell.87263/post-2831157

 

[BD6G]

Added Kenda Klever R/Ts today in 35 12.50 17

 

[Pops]

installed my DIY antenna delete kit. 2025 badlands has a male stainless threaded stud.

I've turned the AM/FM radio on once to check that it worked, 'never listen to it.
I got tired of having the antenna being beaten around by shrubs and on the highway, especially in headwinds.

This can easily be "unscrewed" and the antenna put back on as needed.
I could paint the thing black.

An inch of girls' costume pink neckless tube, with the original neckless neon connector plug. Sealed the plug with some old Passion Red nail polish.
Hey, it's what I found lying around the garage that fit, is light weight, and protects the stud threads.

What's next for me, pink D-shackles on the front? only if I remove some body armor. hahaha...

 

[Gambitl7]

Went and installed my rukRac to get ready for our 5000+ mile trip starting next week. Should help carry plenty of our gear and luggage. I will say the customer service was top notch as this is their 10th edition that hasn’t been released yet but was able to get the first one built because my trip is happening before the full release.

 

[KreeHBronco]

I installed my IAG skid plate with oil access on my 2026 Badlands 4-dr 2.3L manual great and it is way thicker/stronger than the OEM plate it replaces. Plus a portion of the plate can be removed by removing one bolt for oil access.

 

[MilesTeg]

Couple things today. First a quick detail:

• Interior detail - Chemical Guys interior cleaner/protectant
• Clean the Moab dust out of lots of things -- molle pouches, trim seams, etc.
• Clean/dress door seals (CG VRP)
• Exterior hand wash/minor claying
• Undercarriage spray with my pressure washer + attachment.
• Meguiar's Ultimate wax - paint and wheels
• Rainx on all glass
• CG VRP for tires (mostly for the spare so it's nice and shiny, hah)

Also finally got my overhead molle panel (mostly) installed and test fit the control unit for my Yaesu Amateur radio.

 

[AZMikeL]

Saw a couple of places here in Chennai (exact opposite side of the rock from Phoenix) that would be wheelable. Problem is you'd need to drive on-road to get to them - something I'd never do here in India!

I talk to the wife and kid every day, so mostly missing the Bronco!

 

[Fastmc25]

I pre-ordered my hardtop lift from EZ 4 x 4.
can’t wait.

 

[Gut]

New wheels and tires off a '25 Badlands. Unfortunately, the TPMS sensors are dead. $300 for new ones, installed with a 6 year warranty.

I found the tires on Marketplace, guy drove his truck from the dealer to his "guy" where they lifted it and bolted on 37's. They were lyingin the back of a liquor store fo two years, gathering dust. I am curious about the sensors dying after that short of time but I am getting the new ones anyway since Ford changed frequencies between '23 and '25 so they wouldn't have worked anyway.

 

[TheKim]

Took the doors off and put the car seats in -
Going to take the kiddos wheeling.

 

[‘21OBX]

Removed the not even 2 years old Eibach pro truck 2.0 coilovers that were/are junk at under 20k miles. Installed a set of pro comp 2.5” coilovers. At least when the Pro Comp’s leak I can rebuild them and not have to throw away a $2000 set if coilivers. I’m going to give it a couple weeks to settle then adjust for stance. Yes the undercarriage is filthy it’s my wife’s daily and her responsibility to keep it clean

 

[Muddog899]

Bought Betty white a stable mate

 

[OffroadCamper]

RCI rear shock mount skids, crossmember skids, Light mounts, BD combo lights, Ham radio, antenna and whip mount. Sliders Monday. Desert Thursday.

 

[mjp2]

Ran the Rimrocker Trail.

Nice truck but what if you want to bring gear with you?

Sponsored