Search results

Hey ya'll, Do any of you know if ghost headlights can be "fixed" with some Forscan exorcism? Did my best to find a thread here on this topic. Please share a link if you know of one. These ghost headlights are annoying.. Although.. I love that they scare my neighbour haha

That "new" top looks like it was never built right. Or like some folks are saying - it came from some backup of a backup of a scrap pile. No QC at all. I believe you can hire an independent appraiser, get the current state of your vehicle appraised, and start a Diminished Value case against...

Worth trying them out. I'll give them a shot. Thanks so much for sharing! Update on the high quality spanner Eibach provides: The welded pin broke. I use a Tein spanner a neighbour gave me. All metal. No welds.

Can you please share (dm) the Etsy store? Won't hurt to ask. Most of the Etsy stores I asked weren't able to do the design, but were willing to print it.

I owe this group a detailed build. It was easy and no more than $100, probably $50 given thst I had a bunch of stuff laying around the garage.

On the road I run 29 cold. 5 minutes of driving gets them up to 32psi at a surface temp of 75F. On my way to Crater Lake recently I was running on a 110F surface temp and tires got to 37 psi on the hwy. In the mud I got them down to 10 psi, and I was pretty confident they won't pop out of bead...

I get 17 on the highway and 19 in the city on 91. Aerodynamics of a brick.

There is a bit of a long story behind the name and color. I've been an avid model car collector for about 20 years now. We're talking tens of thousands of model cars. Back in 2012 I found a Bronco model car that I absolutely loved. It was gray/silver with a black top, two seater, etc. So I...

There is a better photo of it. I tried to see if anyone can make it into a 3D design so I can 3D print it or CNC it.

Had to haha 🫏

I have the 2.3 and it has been great. Suprisingly good on gas in the city (even with the 35s). Torque comes early when offroading or in the snow.

Update to the build: Roof Rack: Redrock XT1 Finally found a decent roof rack, that doesn't need the OEM rails. It is suprisingly good quality. It gets wind noise over 85 mph (its more of a resonance), but again... I only drive over the posted speed limits when I'm south of the border (or on the...

I think he did ok. I've tried doing that in the past with some glue-looking thing and a cheapo uv light ... failed miserably lol

Just a quick shoutout to this person who was fixing a chipped windshield at my office. He came by asking who owns the Bronco, saying he can fix the nasty rock chip on the windshield. Dude did it in 15 minutes and charged me really REALLY low price. Not going to disclose exact $, because I think...

Interesting. I'm curious what the equipment is and how challenging it would be to learn the basics. Do you mind sharing tool links/names?

The truck had the coilovers first installed + alignment done in February. At the time almost everything was good, except that front driver side coilover dropped by 1/4 of an inch. It did so on its own, which was bizzare. I then adjusted it back to the originally set height with the (jankiest...

Ohhh la la... Followed SnowBronco's advice and went through all bolts and nuts to check if any of them were loose. Found out rear LCA bolts (on both driver and passanger side) were not torqued enough. They were tight, but not enough I suppose. For the sake of the video, I drove one more time...

Tonight's adventure is duct-taping my phone to show the lower parts of the suspension—apologies for the one-a-day video cadence.

Yup. Going over everything tonight again. I think it is the lower coilover bolts, but need to confirm.

Here is an attemp for a better video with some fancy shmancy slo-mo. It seems it aint the UCA, but maybe LCA? Tomorrow during daylight I'll attempt to duct tape my phone to another part of the underbody to record the LCA.