Ok so I am looking for new tires for my '24 Bronco Wildtrak. Has any one switched out the factory
Goodyear WRANGLER TERRITORY MT
For Bfgoodrich ALL-TERRAINT/AKO3 tires?. How would you compair the everyday ride? Do you notice the extra 18lbs per tire?. 90 % of my driving is on black too, 10% off...
I have a 24 wildrltrak. I installed a hitch and plugged in a wiring plug into the 7-pin connector under the car. But when I turn on my trailer lights all I get is running lights. But NO turn signal or brake lights. Do I need the controller to get all the light funtions? I dont need a brake...
I purchesed the Warn winch kit from Ford since it was a great deal. Warn is offering a rebate on there winches. So I sent in my Ford receipts to apply for the rebate.
Warn rejected it, first saying that the receipts did not have enough information on them.
After calling Warn 3 times and leaving...
I am adding a Warn evo 10s winch to my Bronco. The instructions say to wire it direct to the battery. But, I want to control the power by using one of the up lifter switches.
Warn sells a solinoid that I want to use to control the power going to the winch. I know how to do all the wiring. But I...
All right so I pulled the trigger and ordered the warn winch kit from Ford. Now I need to order a camera relocation bracket. Most are about $140. But Rough Country has theres for $69. I did notice the the bracket from Rough Country sits up higher. Will this give a better view when in the mode...
For any of you that have added fog lights or driving lights that have the amber back lighting, where do you wire that circuit into. They could be any brand.
I don't want to use one of the up lifter switch positions. I found one company that sells a wire harness to tap into the head lights...
Anyone install seat covers.... I just want some inexpensive covers I can put on over the factory seats.
I want to cover them when I go off roading just to keep the leather clean...then pull them off.
Any pictures would be great.
How do you get the wiring to the roof for a lite bar? Do you have to drill a hole in the roof under the access point?....if you have a picture that would be great help.