Search results

So I know that the computer can be off on the mpg estimates, I write down the actual miles, gas used and the computer estimate each fillup. I ran 87 octane for the first full year and my actual overall mpg is around 17.5 mpg (which isn't bad for mostly around town 10 minute drives) and the...

I've been reading through some of the JB4 stuff and still haven't figured out how you change the map on it if you don't have a cell phone or laptop. Would I need to remove the JB4 from the truck and plug it into my PC (with the BMS data cable) to go into it to change the mapping? It seems odd...

So I was looking at the pictures of the stock passenger turbo inlet elbow that @MWILD posted and it made me wonder if there was something I could use to swap it out. The stock elbow narrows down a lot with the built in fins that either try to swirl the air or cut down on the noise to the stock...

I was wondering if there was anyone that has the BurgerMotorsports intake lid/filter and if they noticed any increase in the inlet temp (IAT) with that extra opening it has. It's similar to the Roush but it has the extra opening that faces the fender and looks like it would pull in warmer...

I see some decent prices on some parts and it looks like a legit company but was wondering if anyone has actually bought something and received it. Their website is www.ajusa.com

I was wondering if anybody that has the Injen cai is noticing rain/water getting splashed up and into the intake airbox? The opening is quite a bit wider than the stock airbox so it looks like spray could get up in there easier.

So how do the people that have the ADV ram air hood like it so far? I see it's open to the engine compartment which would let air/dust/rain in so has anyone run into problems with the moisture? Also, how is the hood with movement at highway speeds, is there any deflection or movement (does it...

I installed the MBRP Overland 3" cat-back exhaust this past weekend on my 2 door. You need to cut 15.75" off the intermediate pipe when installing on the 2 door, no cutting is needed for the 4 door. This is the exhaust that has the muffler and resonator with the high tuck single exit. It has...

I've seen people getting the P04DB ccv out of range error with a 2023 with the dual catch cans and the Injen CAI but I was wondering if anyone with a 2023 has gotten the code with the AFE intake since it looks like it has a much bigger opening than the stock air box.

I have a Rough Country 1" leveling kit part #40300. I decided not to install it so it's still new in the box. $50 and shipping would be extra from 08560.

Update 4/17/23: It turns out there is no tire leak so I guess it was just low when they mounted it. The 2 lb drop was just overnight cooling I guess. The ticking noise is still there from time to time so I think that is the gas tank/charcoal filter venting or something. I just put on some...

I have a Fast Intentions axle back exhaust for sale since I could use the money for other things at this point. It has roughly 500 miles on it and will go up slowly as it's on the truck right now. It fits all the Broncos with 2.3 or 2.7 engines. It comes with the muffler/pipe assembly...

I decided not to use the Suma mirrors I bought. They are the standard mirrors with the defroster and no blind spot (Blis) and they do not have the logo. https://www.sumaperformance.com/collections/ford/products/21-ford-bronco-6th-gen $155 plus shipping from NJ 08560.

Does anybody have any good or bad comments on some of the 1-1.25" level kits? My base Sas sits about 1-1/4 to 1-1/2" high in the back so I'm not sure if I should go with a 1" or 1.25" level kit and wondering how those kits worked out for people that installed them. I'd rather be a little short...

I see some of the axle back exhausts from certain manufacturers are the same for the 2.3 and 2.7. Other brands have specific 2.3 vs 2.7 which looks like slight muffler differences. Has anyone installed a 2.3 specific axle back exhaust on a 2.7 truck? I'm guessing it would fit but sound...

Does anybody know if there is any real calculation to the "Miles to E" number? Just curious if there is a real calculation that knows how many gallons of gas are in the tank and based on your mpg avg comes up with this number? Or is it just a guess based on the gallons of gas and the EPA 17...

Do any of the tuners, programmers, Ford Procal work on 2023 Broncos and have they been verified to work? I see them all listed for 21-22 and some just say 21+ so that would make me think they work on the 23's. The JB4 and AFE Scorcher look like they should work but has anyone actually used one...

I was going to look at a Bronco and it turns out the dealer installed the body appearance kit which I really don't care for the look or the price increase. I've removed door moldings and model/name lettering from several trucks I've had but I'm worried about trying to remove it from something...

I joined up thinking I want to get a base model 2 door Bronco and I'm wondering how people like the base model trucks that they put on bigger tires (34-35"). Does the truck feel underpowered with the stock 3.73 gears (assuming 4 cyl engine)? I had a 2013 Tacoma reg cab that had 33" tires and...