2dr dsp/amp that fits stock location?

[Draughon]

This is where i'm at. Have upgraded all components, added 6.5'' SSV pods, and have popped in an 8'' Kicker speaker into the factory enclosure. Next step - the Mobridge.

The Mobridge amp/dsp combo is everything I want, but it won’t fit the 2dr. Is there a dsp/amp with similar specs that will fit and is nearly as plug-n-play?

plans are to upgrade the dsp/amp and subwoofer first and then consider replacing other speakers.

Sponsored

 

[brkdncr]

This is where i'm at. Have upgraded all components, added 6.5'' SSV pods, and have popped in an 8'' Kicker speaker into the factory enclosure. Next step - the Mobridge.

what speakers did you go with?

I think I’m going to go with a rear door mounted subwoofer. I have a 10” JLaudio just collecting dust, and removing the stock sub woofer would free up that room for an amp rack to put either some amps I already have or the Mobridge.

 

[Draughon]

Here's what I have now, and what I'm optionally thinking about upgrading with:

FRONT:
3 x 4’’ JL C1-400x @ 35watt RMS, 105watt Peak (left right corners and center channel)
*Optional* - Morel Tempo Ultra Integra 402 MKII - (60 watt rms 140peak) $260/pair

2 x 6.5’’ speakers to JL C1-650x (50 watt RMS, 225Watt peak)
*Optional* - Morel Tempo Ultra Integra 602 MKII - (120watt RMS) - $300/pair

Rear:
2 x SSV 2BR-65A pods (60 watts rms, 120watts peak)
*Optional* Add in additional 2 x 8'' kicker marine cans on a 1.5'' bar - https://ssvworks.com/products/unive...-including-dual-clamps?variant=41091369369784

Subwoofer - Added in Kicker 8'' to the stock speaker enclosure (took a bit of dremeling) https://www.crutchfield.com/p_20648CT84/Kicker-48CWRT84.html
(300watt RMS / 600 watt peak)

what speakers did you go with?

I think I’m going to go with a rear door mounted subwoofer. I have a 10” JLaudio just collecting dust, and removing the stock sub woofer would free up that room for an amp rack to put either some amps I already have or the Mobridge.

 

[brkdncr]

Here's what I have now, and what I'm optionally thinking about upgrading with:

FRONT:
3 x 4’’ JL C1-400x @ 35watt RMS, 105watt Peak (left right corners and center channel)
*Optional* - Morel Tempo Ultra Integra 402 MKII - (60 watt rms 140peak) $260/pair

2 x 6.5’’ speakers to JL C1-650x (50 watt RMS, 225Watt peak)
*Optional* - Morel Tempo Ultra Integra 602 MKII - (120watt RMS) - $300/pair

Rear:
2 x SSV 2BR-65A pods (60 watts rms, 120watts peak)
*Optional* Add in additional 2 x 8'' kicker marine cans on a 1.5'' bar - https://ssvworks.com/products/unive...-including-dual-clamps?variant=41091369369784

Subwoofer - Added in Kicker 8'' to the stock speaker enclosure (took a bit of dremeling) https://www.crutchfield.com/p_20648CT84/Kicker-48CWRT84.html
(300watt RMS / 600 watt peak)

im probably going to land on C2’s for the 3 dash speakers and the c2-650w woofers for the doors. I don’t need rear speakers so those may stay stock.

im guessing the c1’s aren’t much better than stock?

 

[Draughon]

the components are certainly much better than stock, but it’s all underpowered. I’ll see what happens after I put the Mobridge in.

im probably going to land on C2’s for the 3 dash speakers and the c2-650w woofers for the doors. I don’t need rear speakers so those may stay stock.

im guessing the c1’s aren’t much better than stock?

 

[Altitude]

Here's what I have now, and what I'm optionally thinking about upgrading with:

FRONT:
3 x 4’’ JL C1-400x @ 35watt RMS, 105watt Peak (left right corners and center channel)
*Optional* - Morel Tempo Ultra Integra 402 MKII - (60 watt rms 140peak) $260/pair

2 x 6.5’’ speakers to JL C1-650x (50 watt RMS, 225Watt peak)
*Optional* - Morel Tempo Ultra Integra 602 MKII - (120watt RMS) - $300/pair

Rear:
2 x SSV 2BR-65A pods (60 watts rms, 120watts peak)
*Optional* Add in additional 2 x 8'' kicker marine cans on a 1.5'' bar - https://ssvworks.com/products/unive...-including-dual-clamps?variant=41091369369784

Subwoofer - Added in Kicker 8'' to the stock speaker enclosure (took a bit of dremeling) https://www.crutchfield.com/p_20648CT84/Kicker-48CWRT84.html
(300watt RMS / 600 watt peak)

I recommend these for the kick panel: Memphis Audio MJP6 MOJO Pro Series 6-1/2" 4-ohm component woofer at Crutchfield

Putting a coax in the kick panels really lowers the sound stage. I've been very happy with these in the kicks and the Morel Ultra-coaxs in the dash.

 

[Draughon]

I *just* ordered the Morels... should be a solid choice. We'll see!

I recommend these for the kick panel: Memphis Audio MJP6 MOJO Pro Series 6-1/2" 4-ohm component woofer at Crutchfield

Putting a coax in the kick panels really lowers the sound stage. I've been very happy with these in the kicks and the Morel Ultra-coaxs in the dash.

Sponsored