4 Door Bronco Wildtrak Black Out Build on 37" KM3s

[badbronc4x4]

I am just running their beauty rings that look like their beadlocks.

What kind of spacer were you thinking of running? I’m curious what others are doing and how it looks.

I was wondering if I needed to run a spacer to make the Beadlocks work. I plan on using mine for beadlocks.

Sponsored

 

[redone17]

Now only if Ford made the MIC top BLACK instead of whatever the F they call it.

I’m considering testing out Solution Finish on mine to see if I can get it black.

 

[DaBronCo33]

This is the first build I’ve seen with 37s that I like. Really nice build, really well balanced. And that tinted windshield is effing

 

[HOSSMAN]

I know mine is a 2 door, but here’s my stance on the Zone you are considering.

That looks sweet! Love it and the BFGs too!

 

[KompressorV12]

I love your rig! It looks good!

So the ride quality is awesome. However I had to max out the front adjustment and it still doesn’t sit level. I could lower the rear to get it level but I’m content with it since I’ll be switching to the Fox 2.5 sometime this year…. Hopefully haha.

Today was the first time I loaded down the rear. I can take some measurements this evening and let you know how much it changed. Just eyeballing it, I would say I dropped about 1.25” with 250-300lbs of stuff.

I’m actually hoping for rake. The eibach springs only have only about .5” of rake so the moment you put 200lbs or more in the back you have the Carolina squat. Very interested to know your measurements. Could you tell me how much lower the front sits than the rear? I’m Hoping for 1”

 

[BroncoDymond88]

In your first few photos it looks like the hard top is black, is it? I'd LOVE to know the best way to make that happen, it's the only reason I prefer the soft top on my Wildtrak, it matches all the other black accents.

 

[Donut]

Now only if Ford made the MIC top BLACK instead of whatever the F they call it.

I’m considering testing out Solution Finish on mine to see if I can get it black.

What is that? I might have to look into that after my hard top gets replaced.... Mine started cracking so I am waiting for Ford to send me a new one. Luckily it was covered by warranty.

 

[Donut]

In your first few photos it looks like the hard top is black, is it? I'd LOVE to know the best way to make that happen, it's the only reason I prefer the soft top on my Wildtrak, it matches all the other black accents.

I actually didn't do anything to it. It might just be the lighting haha.

 

[Donut]

I’m actually hoping for rake. The eibach springs only have only about .5” of rake so the moment you put 200lbs or more in the back you have the Carolina squat. Very interested to know your measurements. Could you tell me how much lower the front sits than the rear? I’m Hoping for 1”

Okay so I got the measurements. Keep in mind that I maxed out the adjustments on the front coil overs and didn't touch the rear coil overs. My measurements aren't very scientific either haha.

From the Center Point on Top of the Tire to the Center Point on the Fender Flares:

• Front 6 1/4"
• Rear 6 7/8"

From a Flat Surface to the Center Point on the Fender Flares:

• Front 40 3/4"
• Rear41 1/2"

 

[Donut]

Stunning
Amazing build man

I just realized that my build is a lot like yours just a 4 door! You've got great taste haha. I really love what you've done with yours! I want those ADV fenders!

 

[Donut]

I was wondering if I needed to run a spacer to make the Beadlocks work. I plan on using mine for beadlocks.

Ohhh, I don't think so, but I would double check with RRW.

 

[Donut]

This is the first build I’ve seen with 37s that I like. Really nice build, really well balanced. And that tinted windshield is effing

Thank you! I really appreciate that! That ceramic tint is amazing during the summer!

 

[Atoledo95]

I just realized that my build is a lot like yours just a 4 door! You've got great taste haha. I really love what you've done with yours! I want those ADV fenders!

Thanks man appreciate it
Yeah I’m loving them fenders look great and Greta quality all around. Just axles and suspension now.

 

[2020FordRaptor]

Hey everyone, here is my build so far! I have a 2022 Ford Bronco Wildtrak 2.7L with the Sasquatch suspension and Lux package.

Suspension:

• Camburg Racing KINETIK Billet UCA
• Camburg Racing KINETIK Billet Trailing Arms
• Eibach 2.0 adjustable coil overs. (Will switch out to the Fox 2.5 adjustable coil overs whenever they come in stock)

Wheels and Tires:

• RRW Wheels- RR6-H 17x8.5 -12 offset paired with their billet beauty rings
• BFGoodrich 37x12.5r17 KM3 tires

Other Exterior:

• SVC Offroad matching front and rear bumpers
• SVC Offroad rock sliders
• Hammerbuilt tailgate reinforcement and 3rd brake light extender
• Autobahn i3 Ceramic tint all the way around.

Performance:

• K&N CAI and charge pipe
• Ford Performance ProCal4
• Magnaflow Overland Series exhaust
• Turbosmart BOV (not really performance... just makes a cool sound haha)

Interior:

• Speaker swapped all the speakers with JL Audio C2 speakers
• Mabett 6.5 speaker pod upgrade
• Dynamat Door, Rear Cargo, and Floorboard kit.
• Additional dynamat behind the speakers

Cool!

 

[MisterBronco]

Looks bad ass!

Sponsored