7/14 Blend Date Thread

[#1Bentley]

Anyone else wake up to the tracker have the ETD removed completely and on the B6 tracker back to 1990?

Yep. Exact same thing for me.

Sponsored

 

[cparksjr]

Did you check the freight tracker?

Yes, it shows Pending under Status and Destination is null.

 

[Tadel001]

Mine has not gone from N/A to just a dash.

 

[HoosierDaddy]

Anyone else wake up to the tracker have the ETD removed completely and on the B6 tracker back to 1990?

Yep.

 

[BroncoMiami]

Anyone else wake up to the tracker have the ETD removed completely and on the B6 tracker back to 1990?

Yep! Incredible.

 

[BravoV4]

So this is in an email dealerships got today from Ford.


STATEMENT REGARDING BRONCOS AT MICHIGAN ASSEMBLY PLANT UPDATE

As part of our commitment to deliver a quality vehicle to our Bronco customers, all vehicles at MAP are undergoing additional quality checks.

 

[MacDonald_Photo]

So this is in an email dealerships got today from Ford.


STATEMENT REGARDING BRONCOS AT MICHIGAN ASSEMBLY PLANT UPDATE

As part of our commitment to deliver a quality vehicle to our Bronco customers, all vehicles at MAP are undergoing additional quality checks.

Well, that was quite an email.....I guess the P.R. dept. must have been spending the last two weeks drafting verbiage.

 

[BravoV4]

Well, that was quite an email.....I guess the P.R. dept. must have been spending the last two weeks drafting verbiage.

There's more in the email, but nothing else in the email pertains to why are we waiting for our Broncos. It's comments like these that leave me wondering if I should continue to try and be helpful.

 

[MacDonald_Photo]

There's more in the email, but nothing else in the email pertains to why are we waiting for our Broncos. It's comments like these that leave me wondering if I should continue to try and be helpful.

I guess it's better than nothing.
Not much better...But better.
I'd like to know WHAT QC checks are being done to mine so I know what to be on the lookout for 6 months after taking delivery.

Is it my MIC top (we all assume so)?
It is some sort of electrical issue? There have been some reports of odd occurrences
Is it something NONE of us are aware of yet but might benefit from being let in the loop on?

I mean we are paying hard-earned money (well I know I am anyways) for these things so don't we deserve a little more info?

We are the customer.....We are paying money.......A little information to put my mind at ease would be greatly appreciated.

 

[CO-Bronco]

-------------------------------------------------------------------------------------
Members of this Thread up to pg. 25:
@MacDonald_Photo | @5280Bronco | @Firedude | @BlazinGTO | @BravoV4 | @Ironmomof3 | @Ibleve | @jbrentd | @Techun | @Njt5509 | @BBSBronco | @Zeno | @#1Bentley | @Broncosofinsta | @TennesseeBronco | @Zap74 | @zfischer | @Jgrzy | @dvon | @Runningwaters | @TennesseeBronco | @Carolina Jim | @jmalinov | @DudeBronco | @KyTruckPlant | @Permaxyz | @Ironmomof3 | @BuckinOnEm | @BroncoSRQ | @LPETTIS4 | @Gangstead | @cparksjr | @basundy | @DillyCrack | @Richtor | @BroncoMiami | @intothewildnoodles | @mandyhoth | @96GreenBronco | @gemask | @Lagrange 6g | @AntiMatter Outer Banks 2d | @PistolPete | @CZYHORSVA | @mcalpal | @s_white21 | @
-------------------------------------------------------------------------------------

Hi All - After over a week of endlessly watching the 07/13-14-15-19 Threads (Over 380 pages in total) there is one common theme, >90% of us are stuck in Production. But it is very hard to quantify this with the data spread over hundreds of pages.

I had some free time and created a simple "Bronco Production Tracker" to amalgamate all of our build data in one place to hopefully paint a better picture of Ford's progress.

I figured I'd post it here first to get some data and gather some feedback for potential improvements before creating an individual Thread (aiming for tomorrow morning) as I'm sure there are things I have forgotten to add.

--------------------------------
Please fill out the Tracker here:
Bronco Production Tracker
--------------------------------

Tracker Data Charts can be found here:
Charts

"In-Production" Only Vehicle Charts can be found here:
"Bad Batch" Charts

Raw Data can be found here:
Raw Data

Shout out to @PecOBX , @Permaxyz , @KyTruckPlant, @MacDonald_Photo and multiple others for helping track our progress and data thus far!


***EDIT*** It is worth noting that the Tracker is set up to be able to re-enter and update your STATUS as you ultimately (hopefully) move along the Production Process.

 

[MacDonald_Photo]

-------------------------------------------------------------------------------------
Members of this Thread up to pg. 25:
@MacDonald_Photo | @5280Bronco | @Firedude | @BlazinGTO | @BravoV4 | @Ironmomof3 | @Ibleve | @jbrentd | @Techun | @Njt5509 | @BBSBronco | @Zeno | @#1Bentley | @Broncosofinsta | @TennesseeBronco | @Zap74 | @zfischer | @Jgrzy | @dvon | @Runningwaters | @TennesseeBronco | @Carolina Jim | @jmalinov | @DudeBronco | @KyTruckPlant | @Permaxyz | @Ironmomof3 | @BuckinOnEm | @BroncoSRQ | @LPETTIS4 | @Gangstead | @cparksjr | @basundy | @DillyCrack | @Richtor | @BroncoMiami | @intothewildnoodles | @mandyhoth | @96GreenBronco | @gemask | @Lagrange 6g | @AntiMatter Outer Banks 2d | @PistolPete | @CZYHORSVA | @mcalpal | @s_white21 | @
-------------------------------------------------------------------------------------

Hi All - After over a week of endlessly watching the 07/13-14-15-19 Threads (Over 380 pages in total) there is one common theme, >90% of us are stuck in Production. But it is very hard to quantify this with the data spread over hundreds of pages.

I has some free time and created a simple "Bronco Production Tracker" to amalgamate all of our build data in one place to hopefully paint a better picture of Ford's progress.

I figured I'd post it here first to get some data and gather some feedback for potential improvements before creating an individual Thread (aiming for tomorrow morning) as I'm sure there are things I have forgotten to add.

The Tracker can be found here:
Bronco Production Tracker

Raw Data can be found here (I plan on adding charts/pivot table once more data is gathered):
Raw Data

Shout out to @PecOBX , @Permaxyz , @KyTruckPlant, @MacDonald_Photo and multiple others for helping track our progress and data thus far!

Looking forward to the consolidation thread that you're creating! And you're right, keeping track of things across multiple threads and countless posts that are just venting is a nightmare and provides no useful data just in case Ford is actually paying attention to these groups.
Thanks for putting in the work!

 

[Njt5509]

Thank you to all for putting this together.

 

[BuckinOnEm]

Thank you for doing this!

 

[BravoV4]

I guess it's better than nothing.
Not much better...But better.
I'd like to know WHAT QC checks are being done to mine so I know what to be on the lookout for 6 months after taking delivery.

Is it my MIC top (we all assume so)?
It is some sort of electrical issue? There have been some reports of odd occurrences
Is it something NONE of us are aware of yet but might benefit from being let in the loop on?

I mean we are paying hard-earned money (well I know I am anyways) for these things so don't we deserve a little more info?

We are the customer.....We are paying money.......A little information to put my mind at ease would be greatly appreciated.

Without a doubt we deserve more info. I also would like to know exactly what it is they are looking for, I have a feeling it's the molded in color tops for those that have them. We are all in this together. I'd rather have drip fed info than none at all.

 

[Zeno]

-------------------------------------------------------------------------------------
Members of this Thread up to pg. 25:
@MacDonald_Photo | @5280Bronco | @Firedude | @BlazinGTO | @BravoV4 | @Ironmomof3 | @Ibleve | @jbrentd | @Techun | @Njt5509 | @BBSBronco | @Zeno | @#1Bentley | @Broncosofinsta | @TennesseeBronco | @Zap74 | @zfischer | @Jgrzy | @dvon | @Runningwaters | @TennesseeBronco | @Carolina Jim | @jmalinov | @DudeBronco | @KyTruckPlant | @Permaxyz | @Ironmomof3 | @BuckinOnEm | @BroncoSRQ | @LPETTIS4 | @Gangstead | @cparksjr | @basundy | @DillyCrack | @Richtor | @BroncoMiami | @intothewildnoodles | @mandyhoth | @96GreenBronco | @gemask | @Lagrange 6g | @AntiMatter Outer Banks 2d | @PistolPete | @CZYHORSVA | @mcalpal | @s_white21 | @
-------------------------------------------------------------------------------------

Hi All - After over a week of endlessly watching the 07/13-14-15-19 Threads (Over 380 pages in total) there is one common theme, >90% of us are stuck in Production. But it is very hard to quantify this with the data spread over hundreds of pages.

I had some free time and created a simple "Bronco Production Tracker" to amalgamate all of our build data in one place to hopefully paint a better picture of Ford's progress.

I figured I'd post it here first to get some data and gather some feedback for potential improvements before creating an individual Thread (aiming for tomorrow morning) as I'm sure there are things I have forgotten to add.

The Tracker can be found here:
Bronco Production Tracker

Charts can be found here:
Charts

Raw Data can be found here (I plan on adding charts/pivot table once more data is gathered):
Raw Data

Shout out to @PecOBX , @Permaxyz , @KyTruckPlant, @MacDonald_Photo and multiple others for helping track our progress and data thus far!


***EDIT*** It is worth noting that the Tracker is set up to be able to re-enter and update your STATUS as you ultimately (hopefully) move along the Production Process.

Thanks!

Sponsored