Adding light switch with fog light option

[Glade Runner]

I dont think you paid $20-$30. I paid about $90 back in 2021...

$25.61 at Ruxer

https://www.ruxerparts.com/oem-parts/ford-headlamp-switch-m2dz11654ac

Sponsored

 

[4x4TruckLEDs.com]

Damn I paid $77.28 years ago.

My part # was M2DZ-11654-DA though. That site you linked (Ruxer) sells the one I got for $81.90

So mine clearly has additional functions

 

[PorpoiseBlue]

I paid 74 for the switch with both the front and rear fogs!
I use the rear switch to switch my front fogs to amber.

 

[DriveAllNight]

$25.61 at Ruxer

https://www.ruxerparts.com/oem-parts/ford-headlamp-switch-m2dz11654ac

Depends on which one you need..

 

[Chrome_Pony]

Have one sitting in the garage I took out of my 23 Badlands High to replace with the dual F/R foglight switch... that I'll eventually get around to wiring a use for.

M2DT-13D061-DDW

 

[flip]

Here's a list of all the switch choices. Basically, you look up what is on the vehicle according to HVBOM or parts catalogue, then find the one with the same options and "front fog lamps". In 2021 there weren't nearly as many choices, supersessions and build date breaks.

If you've set up an account on our parts store, sent me a DM with the email addy you used, I put you in the 6G discount group so the price you see below from the catalogue is list, not what you will see on www.ruxerparts.com.

 

[maunman2]

@flip, you’re a kind gentleman for offering us all a discount. I will set up an account soon.

I currently have a -HC style switch since I have spots and puddle lamps but no fog lamps in my Badlands High w/modular bumper. Do you know if a person could buy a -AC switch and swap the bezel with their original bezel that has the spot buttons? Would the puddle lamps be a problem even if you could swap bezels?

Thanks,

A fellow Flip

EDIT: I stumbled onto the answer to my question. Per this post, one cannot buy a headlamp switch module without spot switches (the lights on the mirrors that are part of the zone lighting group) and swap the bezel in order to retain their old spot switches:

https://www.bronco6g.com/forum/threads/factory-fog-light-switch.22937/post-1733008

 

[AzGrayHeritage]

Don't mean to hijack but I have this switch, can I swap out in my Heritage and and use this for adding lights?

 

[Dugout]

If anyone still checks this post, do you need a special wiring harness for added fogs lights on modular bumper?

@4x4TruckLEDs.com same guy sending you an email.

 

[4x4TruckLEDs.com]

If anyone still checks this post, do you need a special wiring harness for added fogs lights on modular bumper?

@4x4TruckLEDs.com same guy sending you an email.

If your truck is a 2024 or earlier and you have front sensors, then the pigtail is in your bumper near the tow hook. You can use one of our pigtails and fog kits (you'll need to buy your own switch panel and program the circuit via forscan)

If you have a 2025+ then you have no pigtail in the bumper and you need to buy a new harness (i don't know part #'s but scroll up, someone else does)

Sponsored