- Thread starter
- #16
Perfect…Same winch I’m headed towards. I suspect the 12K is not recommendedI went with a Smitybuilt 10K X20 Gen3 winch.
Sponsored
Perfect…Same winch I’m headed towards. I suspect the 12K is not recommendedI went with a Smitybuilt 10K X20 Gen3 winch.
Mine works fine..The obvious check is connection and proper locate of sensor. Other than that maybe sensor went badHow is it going guys, I have a 2022 bronco with the lux package. Did the arb summit bumper. Now my acc doesn’t work. Relocated the radar, and all. Still nothing. Has anyone ran into this?
I am running the warm vr10000s. It’s awesome. I didn’t notice any drop. Been off-road multiple times with zero issues. Just installed rear arb as well. Good products from arb!!How much drop in the front suspension did you see when you installed the bumper and winch? What kind of winch are you running?
How did you reroute the wires? I did mine per the instructions and the length just barely connected. I pulled in back apart and re ran the wires to get more slack. All good now. Also make sure that you have the ACC activated on your screen.How is it going guys, I have a 2022 bronco with the lux package. Did the arb summit bumper. Now my acc doesn’t work. Relocated the radar, and all. Still nothing. Has anyone ran into this?
Looks great2023 Badlands Sasquatch. I saw a 3/4” drop on mine. Running a Warn Zeon 10S and dual Baja Designs LP6 lights. I installed it with a buddy and it was fairly labor intensive. A lot of parts to put together on the bumper. Ran into a small issue with one of the recovery hook slots being too narrow or the red coating on the hook was too thick. Removed some of the paint and it worked. Very satisfied with the end result. I do some moderate rock crawling and the recovery hooks have gotten hung up on some approaches (nothing a can of red paint won’t fix). I’ll be lifting it with some adjustable Fox 2.5 PEs to meet my needs of both overlanding, moderate rock crawling and towing.