BCM Diagram needed

[jpaulsbronco]

I am going to add the led taillights to my 2024 black diamond 2 door and want them to work like from the factory. I know I need to run the 2 wires from the Bcm to the taillight harness but need to know what slots to use on the Bcm and taillight harness. Can anyone assist in helping me with this task? I know I will need to change stuff with forscan. Thanks

Sponsored

 

[CactusBob]

Side	BCM Connector	BCM Pin	Taillight Connector Pin
Left (Driver)	C2280D (Black 72-pin)	Pin 54	Pin 5
Right (Passenger)	C2280D (Black 72-pin)	Pin 18	Pin 5

The new wire goes into the previously empty cavity Pin 5 of each LED taillight connector. That pin is the dedicated amber turn signal input on the factory LED lamps.