Bore Size?

[DUSTYcazOREGON]

Do we know the wheel center bore size / the spigot size of our BRONCOS in mm ? Not a guess or presuming it is the same as the Ranger....an actual confirmation. Thank you.

Sponsored

 

[ZackDanger]

I thought someone measured it with their calipers in the factory a while back... maybe it was just the ask that never got done?

 

[DUSTYcazOREGON]

I thought someone measured it with their calipers in the factory a while back... maybe it was just the ask that never got done?

I did use the search feature. Questions about it and one guy said it was 93.1 "same as the Ranger"...but I do not know if that was an assumption or a fact. Would be nice to get factory/employee confirmation on that.

 

[KH_59]

https://www.bronco6g.com/forum/thre...mpleted-bronco-black-diamond.5952/post-222688

Find the comment that says:

Mike L confirmed in a Tweet that the Base Bronco uses the 16x7 Ranger steel rims. They have a 6x5.5" bolt pattern, 55mm offset and a 93.1 mm hub bore.

 

[ZackDanger]

I did use the search feature. Questions about it and one guy said it was 93.1 "same as the Ranger"...but I do not know if that was an assumption or a fact. Would be nice to get factory/employee confirmation on that.

Well.. how's this:

https://www.bronco6g.com/forum/threads/-2021-bronco-oem-factory-rims-wheels-specs-sizes-offsets-.11893/

Here is a picture from the factory of the 17" steel wheels... exact same numbers as the Ranger steel wheels... Makes me think that "same as the Ranger" is a safe assumption!

::EDIT:: Link in post above to Levine confirming that steelies are shared across platforms.

 

[DUSTYcazOREGON]

Well.. how's this:

https://www.bronco6g.com/forum/threads/-2021-bronco-oem-factory-rims-wheels-specs-sizes-offsets-.11893/

Here is a picture from the factory of the 17" steel wheels... exact same numbers as the Ranger steel wheels... Makes me think that "same as the Ranger" is a safe assumption!

::EDIT:: Link in post above to Levine confirming that steelies are shared across platforms.

Hopefully you are correct....but the number is not the same, unless I am wrong. One has a "Z" while the other a "C".

 

[DUSTYcazOREGON]

https://www.bronco6g.com/forum/thre...mpleted-bronco-black-diamond.5952/post-222688

Find the comment that says:

Mike L confirmed in a Tweet that the Base Bronco uses the 16x7 Ranger steel rims. They have a 6x5.5" bolt pattern, 55mm offset and a 93.1 mm hub bore.

Looks like 93.1 is correct. Thanks to all for the responses.

 

[ZackDanger]

Hopefully you are correct....but the number is not the same, unless I am wrong. One has a "Z" while the other a "C".

My understanding is that figure in the part number only refers to what "division" that part number came from or something or other.

Furthermore there are subsequent part numbers listed on the Ranger wheel that match exactly what the Bronco wheel has stamped on it.

Sponsored