Lets get the answer to wheel bore?

[chtucker]

We have Badlands and Sasquatch backspacing/offset confirmed..

Anybody want to bring a set of calipers to the next auto show? Spot something on the street? I will send you calipers if you live around the factory???

Its the missing piece...

Sponsored

 

[67 - 87 Bronco II - 21]

It may, or may not be of any value to the Bronco, but the Ranger bore is 93.1 mm.

https://www.detroitwheelandtire.com...-10230-gloss-black-hol-10230-bbb-gloss-a.html

 

[chtucker]

I did find that they do make adapters..

https://lugnutguys.com/products/hub-centric-rings-106mm-to-93-1mm-set-of-4

I have seen other metal ones as well..

 

[KH_59]

If you scale the pixels between the 5.5" bolt circle and the wheel bore on the "Wixom Base" pic, it looks like it would be nominally 93.1mm. Need a physical check by caliper, though, to be certain.

 

[Incognito]

It may, or may not be of any value to the Bronco, but the Ranger bore is 93.1 mm.

https://www.detroitwheelandtire.com...-10230-gloss-black-hol-10230-bbb-gloss-a.html

Mike L stated that the Base Bronco uses the steel Ranger rims.

That means a 93.1 mm hub bore.

Sponsored