- First Name
- Dan
- Joined
- Jul 14, 2020
- Threads
- 3
- Messages
- 167
- Reaction score
- 288
- Location
- Sherrills Ford, NC
- Vehicle(s)
- 2018 Explorer Sport
- Your Bronco Model
- Outer Banks
Went with badlands wheels and tires.
Sponsored
what size tires are these? the same as the stock OBX?Do I have any more pictures lol
Yes. Exact same P255/70 R18what size tires are these? the same as the stock OBX?
that made a huge difference. how big was the drop in gas mileage? just curious because I'm sure my wife will bring that up when I try to swap them.Yes. Exact same P255/70 R18
I’ve pretty much been driving with the top down so my mileage has been around 15-16mpg. I couldn’t say whether the tires made any difference at all. The only thing I can say, is I really like these tiresthat made a huge difference. how big was the drop in gas mileage? just curious because I'm sure my wife will bring that up when I try to swap them.
you sure that’s the +30? Zero was the SAS units, +30 was the recommended stock Badlands non SAS? This is my final choice wheel and I want to be 100%RTR +30mm, same as the SAS wheel. Poke is a little over 1” which I think looks good. Crash bars are removed JIC there would be contact at full articulation. Here’s a pic. Hope that helps.
+30 sounds and looks correct. Here’s my non-Sasquatch with the Ford OEM Sasquatch +30 wheels with 315/70R17 Wildpeaks.you sure that’s the +30? Zero was the SAS units, +30 was the recommended stock Badlands non SAS? This is my final choice wheel and I want to be 100%
how is the mpg?Non Sasquatch with Sasquatch wheels, 315/70/17 Wildpeaks, and a 1.25” leveling kit.
17.6 plus or minus 0.5 mpg depending on how I drive it. I don't baby it.how is the mpg?
Did you get 4.27 or is it just the standard axle.17.6 plus or minus 0.5 mpg depending on how I drive it. I don't baby it.
Method sells different colored screw kits.Ilove my Method 305's after I modified them.
Standard. I removed a bunch of contraints to get this one earlier as I got impatient. My 2nd Bronco with Sasquatch, MIC, LUX, and 2.7 just got built last week.Did you get 4.27 or is it just the standard axle.