Diode Dynamics SS5 Pillar & Roof Light Bar Installation

[4x4TruckLEDs.com]

Check out this recent install we performed at our shop for a local customer.

He went with our Diode Dynamics SS5 A-Pillar Kit (https://www.4x4truckleds.com/diode-dynamics-stage-series-ss5-ditch-light-kit-for-2021-ford-bronco/), the Diode Dynamics SS5 Crosslink Roof Kit (https://www.4x4truckleds.com/diode-...-crosslink-lightbar-kit-for-2021-ford-bronco/) as well as an AuxBeam Switch Panel since his truck does not have upfitters (https://www.4x4truckleds.com/auxbea...niversal-led-switch-panel-kit-blue-backlight/)

Check out our site at www.4x4TruckLEDs.com where we've got TONS of lights and accessories in stock. If you're local to our Long Island, NY shop (Lindenhurst, NY) contact us to schedule an appointment to have us install these awesome products on your truck

Sponsored

 

[RickDeckard]

So I purchased the Auxbeam RGB 8 Gang Multifuntion Switch Panel from you based on this posting because I don't have the aux switches. I have a some questions.
1. Where did you mount the box in the engine compartment?
2. Do I have to use the acc wire? I would prefer not to but if it's required, which fuse do I use?
3. I like where you mounted the switch panel. How did you run the wire? Did you have to remove the whole dash?
4. I have A pillar lights with back lights. Do I lose the backlights when wiring?
Thanks in advance for your response.

 

[4x4TruckLEDs.com]

So I purchased the Auxbeam RGB 8 Gang Multifuntion Switch Panel from you based on this posting because I don't have the aux switches. I have a some questions.
1. Where did you mount the box in the engine compartment?
2. Do I have to use the acc wire? I would prefer not to but if it's required, which fuse do I use?
3. I like where you mounted the switch panel. How did you run the wire? Did you have to remove the whole dash?
4. I have A pillar lights with back lights. Do I lose the backlights when wiring?
Thanks in advance for your response.

We usually make a bracket to mount the AuxBeam panel into the engine bay, over by the upfitter wires.

I used a fuse tap to turn the unit on.

I didn't remove the dash.

You don't lose any backlight wiring

 

[4x4TruckLEDs.com]

Our Black Friday Sales are LIVE right now here at 4x4TruckLEDs.com

This is a great time to save on our lighting kits for Broncos

These Diode Dynamics kits are 20% off right now!

 

[CentralFLBronco]

Check out this recent install we performed at our shop for a local customer.

He went with our Diode Dynamics SS5 A-Pillar Kit (https://www.4x4truckleds.com/diode-dynamics-stage-series-ss5-ditch-light-kit-for-2021-ford-bronco/), the Diode Dynamics SS5 Crosslink Roof Kit (https://www.4x4truckleds.com/diode-...-crosslink-lightbar-kit-for-2021-ford-bronco/) as well as an AuxBeam Switch Panel since his truck does not have upfitters (https://www.4x4truckleds.com/auxbea...niversal-led-switch-panel-kit-blue-backlight/)

Check out our site at www.4x4TruckLEDs.com where we've got TONS of lights and accessories in stock. If you're local to our Long Island, NY shop (Lindenhurst, NY) contact us to schedule an appointment to have us install these awesome products on your truck

Not trying to be difficult, but I have the 8 gang auxbeam and I’m not sure what fuse to tap into. I don’t want the controller to be on all the time. I only want it backlit when the bronco is on. Can someone tell me which fuse to use?

 

[4x4TruckLEDs.com]

Not trying to be difficult, but I have the 8 gang auxbeam and I’m not sure what fuse to tap into. I don’t want the controller to be on all the time. I only want it backlit when the bronco is on. Can someone tell me which fuse to use?

Did you order everything from us? Shoot me a message if you did with your order # so I can see what you got and point you in the right direction

 

[4x4TruckLEDs.com]

The last day of our spring sale is TODAY. Get those orders in and save some $$

Visit our sales page for details: https://www.4x4truckleds.com/spring-sale/

Sponsored