Does this bolt in two locations, both accessible by removing the interior door panel? I've glued a rigid piece of plastic to the bow in the rubber and that's working until I replace the part.
Sponsored
Sponsored
OP
OP
- First Name
- Kevin
- Joined
- Jan 30, 2024
- Threads
- 1
- Messages
- 7
- Reaction score
- 1
- Location
- Buffalo, NY
- Vehicle(s)
- Bronco
- Your Bronco Model
- Badlands
- Thread starter
- #17
I took door panel off and from i can remember there are two bolts, one under thin rubber at top of door and one along hinge side. Took me an hr total. Longest part was door panel removal and install.
Did you reference a YouTube video or anything, or just figure it out as you went? I just ordered the part and I'm curious if I can save myself some money doing it with a tutorial.
OP
OP
- First Name
- Kevin
- Joined
- Jan 30, 2024
- Threads
- 1
- Messages
- 7
- Reaction score
- 1
- Location
- Buffalo, NY
- Vehicle(s)
- Bronco
- Your Bronco Model
- Badlands
- Thread starter
- #19
No youtube vid. But i just looked at the part schematic to see where the bolts and did a process of elimination to see what needs to come off. Door panel definitely needs to come off to access one bolt. Photos show bolt locations. Two total for guide. Panel has 4 bolts i believe plus clips, theres a video on that.
Sponsored
