Fender flare cleaning product

[Jmax]

I saw a post a long time back about product for cleaning/conditioning the mic material on the fender flares and top but for the life of me I can’t find it now. Does anyone have any suggestions on the best product to use. I can already see at 400 miles that the flares will need some conditioning but don’t want to put bad product that will make it spotty or worse, break down the plastic.

thanks

Sponsored

 

[pjmezz13]

I've used this on a Jeep with fading plastic trim.

Solution Finish - Black Plastic & Vinyl Restorer - Use for Car and Truck Detailing - 1 oz.
by Zoplenti

https://www.amazon.com/dp/B006NZQ3T8/ref=cm_sw_em_r_mt_dp_DEADA621F7ZGTBG6K8K5?_encoding=UTF8&psc=1

 

[555-RGNE]

I used Aerospace 303 on all of my Jeeps and the graying over time was minimal.

 

[Dads_bronze_bronco]

I’ve used Turtle Wax Trim Restorer

 

[JonD79]

Optimum Power clean to give them a good cleaning.
Then some Solution finish to coat them or Cerakote trim coating.
https://www.autoality.com/store/pc/Optimum-Power-Clean-All-Purpose-Cleaner-17-oz-38p270.htm
https://www.autoality.com/store/pc/Solution-Finish-Black-Plastic-Vinyl-Restorer-12-oz-41p7036.htm
https://www.amazon.com/CERAKOTE-Cer...lja1JlZGlyZWN0JmRvTm90TG9nQ2xpY2s9dHJ1ZQ&th=1

 

[broadicustomworks]

I've used this on a Jeep with fading plastic trim.

Solution Finish - Black Plastic & Vinyl Restorer - Use for Car and Truck Detailing - 1 oz.
by Zoplenti

https://www.amazon.com/dp/B006NZQ3T8/ref=cm_sw_em_r_mt_dp_DEADA621F7ZGTBG6K8K5?_encoding=UTF8&psc=1

This stuff is amazing.
Had I known it existed before @Rick Astley schooled me on it, I would have never used anything different, ever again.

 

[BroncoDymond88]

This stuff is amazing.
Had I known it existed before @Rick Astley schooled me on it, I would have never used anything different, ever again.

The reviews on Amazon say this wipes right off, is that your experience?

 

[JonD79]

The reviews on Amazon say this wipes right off, is that your experience?

Solution finish is a bit of a messier product for application. WEAR gloves it will stain your hands. After you apply it you need to do a final buff off after about 15min. Use a garbage rag because it will turn it black. After that it looks good and last a long time. Make sure your truck is waxed or has a sealant. it can stain paint if it has no protection on top of it. It will just wipe off paint if you have something on it.

 

[broadicustomworks]

The reviews on Amazon say this wipes right off, is that your experience?

Yes. Wear gloves. Avoid paint. Stuff is amazing.
one application On the cowl of this Mustang I painted (no after application pic, but you can see it’s greyed out here), and it was deep black, like new.

Sponsored