Fender flare repair

[Riverwolf]

Good morning, I have a 2022 Bronco Base w/Sasquatch package. Do to a rogue tree I managed to separate the right rear fender flare into two pieces. Is it possible to re-attach the top part to the bottom?

Sponsored

 

[Beach_Bum]

Depending on how clean of a separation, it should be easily resolved with some JB Weld. If you never used it before, practice on a some scrap plastics to get a feel for the process. Once it sets, it is permanent.

 

[MNBigfoot]

Check FB marketplace/craigslist, sometimes you'll see complete sets for $50

 

[Squatch]

Just take them all off?

I get that not everyone likes that. Aside from JB Weld, you may want to(I haven't checked if it's possible, but wear a respirator) make some soldering iron plastic "stiches" on the backside, for esthetics, as well. If none of that made sense, I bet there are plenty out there for cheap like @MNBigfoot already said.

 

[CalvinT]

3M sells adhesives designed for gluing the plastics used in automobiles. But they're expensive, $55 on Amazon, and require a dispensing gun. If you're careful you can get by without the gun.

 

[contented]

JB Weld

Sponsored